Package: alsa-utils Priority: optional Section: sound Installed-Size: 3474 Maintainer: Debian ALSA Maintainers Architecture: arm64 Version: 1.2.14-1+rpt1 Provides: audio-mixer Depends: kmod (>= 17-1~), libasound2t64 (>= 1.2.14), libatopology2t64 (>= 1.2.2), libc6 (>= 2.38), libfftw3-single3 (>= 3.3.10), libncursesw6 (>= 6), libsamplerate0 (>= 0.1.7), libtinfo6 (>= 6) Suggests: dialog Filename: pool/main/a/alsa-utils/alsa-utils_1.2.14-1+rpt1_arm64.deb Size: 1417370 MD5sum: b37929acaae77ea7107471e3878b5bd0 SHA1: d6283ba646ea2052409330dd903baa758b7a88d6 SHA256: 0751d5b8bb6812167c67b6b77e51cb85c97febad540bc75667a4a6a5899e800c SHA512: 1183bd6d2c002eb06251cd63b801d77577bb1360e5c9b64d6737900ca26f5d53a3a5c7b79a396f371d138af2d4b3957066495b8c396fff3be4a078b8e93b7f2c Description: Utilities for configuring and using ALSA Included tools: - alsactl: advanced controls for ALSA sound drivers - alsaloop: create loopbacks between PCM capture and playback devices - alsamixer: curses mixer - alsaucm: alsa use case manager - amixer: command line mixer - amidi: read from and write to ALSA RawMIDI ports - aplay, arecord: command line playback and recording - aplaymidi, arecordmidi: command line MIDI playback and recording - aconnect, aseqnet, aseqdump: command line MIDI sequencer control - iecset: set or dump IEC958 status bits - speaker-test: speaker test tone generator . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Multi-Arch: foreign Package: bluez Priority: optional Section: admin Installed-Size: 5567 Maintainer: Debian Bluetooth Maintainers Architecture: arm64 Version: 5.82-1.1+rpt1 Depends: libasound2t64 (>= 1.0.17), libc6 (>= 2.38), libdbus-1-3 (>= 1.10), libdw1t64 (>= 0.127), libglib2.0-0t64 (>= 2.76.0), libreadline8t64 (>= 7.0~rc1), libudev1 (>= 196), init-system-helpers (>= 1.52), adduser, kmod, udev, default-dbus-system-bus | dbus-system-bus Suggests: pulseaudio-module-bluetooth Filename: pool/main/b/bluez/bluez_5.82-1.1+rpt1_arm64.deb Size: 1917306 MD5sum: e8b3e08a5b2e1a8afce61a114e3fe577 SHA1: 9f231c81838f8e2abd3b1273b7dc1d1416265b19 SHA256: 68c6110575be149f03533c22ce0354b7c4dc862d2f198781f6be372d6d06a84f SHA512: 2b76943ac3bdf61286cf9a5fdc4b05d62d7f6933e27b20e034540e877e3415c569595774d33d8038400d2007df438accc5b485700655a3026c5e1ff9c3d2eac6 Description: Bluetooth tools and daemons This package contains tools and system daemons for using Bluetooth devices. . BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Homepage: http://www.bluez.org Multi-Arch: foreign Package: bluez-firmware Priority: optional Section: non-free-firmware/kernel Installed-Size: 476 Maintainer: Serge Schneider Architecture: all Version: 1.2-13+rpt2 Filename: pool/main/b/bluez-firmware/bluez-firmware_1.2-13+rpt2_all.deb Size: 294826 MD5sum: 486643f098e98885cec72b7fbb0eca65 SHA1: fbbe2b32295cbf6405e4474c6a42184e25683761 SHA256: bfa0cb7a3806fb30a50b9f5756efee4530075aab192ba245758881efb2f24421 SHA512: 49bd06074f654479748962bdbd0878c585df3d21eaf67a9290cac1b9793ed7c368a4a7c557cae9e349c17afbb46fb41aedc37cb250d1ba266cec7472f27d5092 Description: Firmware for Bluetooth devices This firmware is required for operation of Bluetooth dongles based on the Broadcom BCM203x and Raspberry Pi chipset. Package: cloud-init Priority: optional Section: admin Installed-Size: 3231 Maintainer: Debian Cloud Team Architecture: all Version: 25.2-1~bpo13+1+rpt20 Replaces: cloud-init-22.4.2 Depends: eject, fdisk | util-linux (<< 2.29.2-3~), gdisk, dhcpcd-base | udhcpc | isc-dhcp-client, locales, lsb-release, netcat-openbsd, procps, python3-configobj, python3-jinja2, python3-jsonpatch, python3-jsonschema, python3-oauthlib, python3-requests, python3-yaml, python3:any Recommends: cloud-guest-utils, eatmydata, sudo Suggests: btrfs-progs, e2fsprogs, python3-passlib, xfsprogs Conflicts: cloud-init-22.4.2, firewalld Filename: pool/main/c/cloud-init/cloud-init_25.2-1~bpo13+1+rpt20_all.deb Size: 683004 MD5sum: 6f8b5968354b1403bc519ddab460cbd0 SHA1: e87ede0f883f6c1ea65f43462ff998ecce251ea2 SHA256: 0a25321117caf8b704d8123ae30cc72fc19dcc8ed1c96a3eaed6d6d807849746 SHA512: c8d207fd34b8d983cdf21949528ef1361c43113bd821ae44a968c9488abb73f15f02009656510f4ad070b03103fe70c9c769cb305357b84a6819ae50291774a8 Description: initialization system for infrastructure cloud instances Cloud-init provides a framework and tool to configure and customize virtual machine instances for Infrastructure-as-a-Service (IaaS) clouds platforms. It can for example set a default locale and hostname, generate SSH private host keys, install SSH public keys for logging into a default account, set up ephemeral mount points, and run user-provided scripts. . Various methods are supported for passing data to the instance at launch time, including the standard interfaces of multiple platforms. Homepage: https://launchpad.net/cloud-init Package: firmware-atheros Priority: optional Section: non-free-firmware/kernel Installed-Size: 97249 Maintainer: Debian Kernel Team Architecture: all Source: firmware-nonfree Version: 1:20250410-2+rpt1 Suggests: initramfs-tools Filename: pool/main/f/firmware-nonfree/firmware-atheros_20250410-2+rpt1_all.deb Size: 44095352 MD5sum: 187ae6197a23fcddda96436bd552adae SHA1: 97b0dd1691d32b666267f0c779fc1af42cd03a63 SHA256: d0bb559de61499dda3026bb5d6cb2f84567a954f71dca65878249f5f2a54040a SHA512: 14ce2ee5ae00b4e2762e9f53853920c6bd0ef5116d004231f7b51a0a7a5176e9701304f6ea3a17fdc07cb86a08c9b3684fc6b5a4654efb41627a17de8e98833b Description: Binary firmware for Qualcomm Atheros wireless cards This package contains the binary firmware for USB wireless network and Bluetooth cards supported by the ar5523, ath3k, ath6kl_sdio, ath6kl_usb, ath10k, ath11k, or wilc6210 drivers. Homepage: https://gitlab.com/kernel-firmware/linux-firmware Multi-Arch: foreign Package: firmware-brcm80211 Priority: optional Section: non-free-firmware/kernel Installed-Size: 20408 Maintainer: Debian Kernel Team Architecture: all Source: firmware-nonfree Version: 1:20250410-2+rpt1 Suggests: initramfs-tools Filename: pool/main/f/firmware-nonfree/firmware-brcm80211_20250410-2+rpt1_all.deb Size: 13033268 MD5sum: 458b8743438e717824905a3982dffcea SHA1: 8e2a096a92cfffe9cd7411b0a9564c08163774b7 SHA256: 761d190f2e3cf70384b06387a1644a9f2753b0671f21d3709f1dfc8c537f7c06 SHA512: 089dc7954d0e7fc65722a39d61ddd4927e62377a3eee9e3c928f79da9ca20a8fadaa453c05f7d866556f828ba0535c70fcbddb1f4e805a81e171bd28c51fbdbf Description: Binary firmware for Broadcom/Cypress 802.11 wireless cards This package contains the binary firmware for wireless network cards supported by the brcmsmac or brcmfmac driver. Homepage: https://gitlab.com/kernel-firmware/linux-firmware Multi-Arch: foreign Package: firmware-libertas Priority: optional Section: non-free-firmware/kernel Installed-Size: 11423 Maintainer: Debian Kernel Team Architecture: all Source: firmware-nonfree Version: 1:20250410-2+rpt1 Replaces: libertas-firmware Provides: libertas-firmware Recommends: firmware-marvell-prestera Suggests: initramfs-tools Filename: pool/main/f/firmware-nonfree/firmware-libertas_20250410-2+rpt1_all.deb Size: 8069262 MD5sum: dfb7ea4c62eebd88cb00568f22ae743b SHA1: 499dff213007bd06481b3fa8c9e07c1a2d2c365c SHA256: b2bf62e0b79bd61d8bb502d6d435c6e5b236ab75fac1929e51335280d6222281 SHA512: 55fa57065939d401b68e4df41b9e0f87eaabfdc81149cdcc3dc5085c5b056283d83a0917adfc189e4b70e006fde0bfd96e02ceadccad9cb3ff31f94730f272d7 Description: Binary firmware for Marvell wireless cards This package contains the binary firmware for wireless network cards with Marvell and NXP 88W8xxx chips supported by the libertas_cs, libertas_sdio, libertas_spi, libertas_tf_usb, mwifiex_pcie, mwifiex_sdio, mwifiex_usb, mwl8k and usb8xxx drivers. Homepage: https://gitlab.com/kernel-firmware/linux-firmware Multi-Arch: foreign Package: firmware-mediatek Priority: optional Section: non-free-firmware/kernel Installed-Size: 46329 Maintainer: Debian Kernel Team Architecture: all Source: firmware-nonfree Version: 1:20250410-2+rpt1 Suggests: initramfs-tools Conflicts: firmware-misc-nonfree (<< 1:20230625-3~) Filename: pool/main/f/firmware-nonfree/firmware-mediatek_20250410-2+rpt1_all.deb Size: 24647172 MD5sum: c1dad95b347fb767af1adc5753a18a72 SHA1: bed8b2ff79f2607aa9561b629bdf84ca264fea01 SHA256: a4abaa15173c58ff006b43a4fdc1f988d5c8a1340fa996ca6f8d6756d01518be SHA512: 2051f39619197efd694a3db7e98e1c7a729356291b3c98d92381a26f53e4744782e8805291000e02d66be2e9cb98ffa56d3e9a412803ab7624a0a74e18ada8c9 Description: Binary firmware for MediaTek and Ralink chips for networking, SoCs and media This package contains the binary firmware for MediaTek devices such as ethernet/Wi-Fi/Bluetooth chips, SoCs and other chips and devices made by MediaTek and Ralink. Homepage: https://gitlab.com/kernel-firmware/linux-firmware Multi-Arch: foreign Package: firmware-realtek Priority: optional Section: non-free-firmware/kernel Installed-Size: 19197 Maintainer: Debian Kernel Team Architecture: all Source: firmware-nonfree Version: 1:20250410-2+rpt1 Replaces: firmware-realtek-rtl8723cs-bt Suggests: initramfs-tools Conflicts: firmware-realtek-rtl8723cs-bt Filename: pool/main/f/firmware-nonfree/firmware-realtek_20250410-2+rpt1_all.deb Size: 9925866 MD5sum: 8eb0c39c9ded8eebe2772d1b4bc0fbb4 SHA1: 827e0df69c1e3751836623a79856a164300d8fc4 SHA256: b33c66626c7abd8d6e2211718de93201d662c54f7a1913726c035bea5baffd58 SHA512: 02d38f59cf6f0c8453dfc4137bba6d5958690402480d4252f3b9d7571e5dfe279ec50b87c5300484f0a349e1c8266346afa3ebf641148500141c8c3b4ed1eb03 Description: Binary firmware for Realtek network and audio chips This package contains the binary firmware for Realtek Ethernet, Wi-Fi, Bluetooth and audio chips supported by various drivers. Homepage: https://gitlab.com/kernel-firmware/linux-firmware Multi-Arch: foreign Package: flashrom Priority: optional Section: electronics Installed-Size: 889 Maintainer: Debian EFI Architecture: arm64 Version: 1.4.0-3+rpt1 Depends: libc6 (>= 2.34), libftdi1-2 (>= 1.2), libjaylink0 (>= 0.4.0), libpci3 (>= 1:3.13.0), libusb-1.0-0 (>= 2:1.0.22) Filename: pool/main/f/flashrom/flashrom_1.4.0-3+rpt1_arm64.deb Size: 223082 MD5sum: ffec3bc881cc0ee444f2057e27cea844 SHA1: 3672f1516cdf29e356c63f976a22af41d239335f SHA256: 63cb7641742835e9fd7a4ebdfee86b65d330b9638137ea5a6660eb0c2738707f SHA512: ee8df1b5eaa496be6a1b2efffe0f9ed17f90350f878731e83d1650f5797090134563e8098de527870d6d91ab2d86a1616c4255e192ad5897769a3bf45a457401 Description: Identify, read, write, erase, and verify BIOS/ROM/flash chips flashrom is a tool for identifying, reading, writing, verifying and erasing flash chips. It's often used to flash BIOS/EFI/coreboot/firmware/optionROM images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips. . It supports a wide range of DIP32, PLCC32, DIP8, SO8/SOIC8, TSOP32/40/48, and BGA chips, which use various protocols such as LPC, FWH, parallel flash, or SPI. . The tool can be used to flash BIOS/firmware images for example -- be it proprietary BIOS images or coreboot (previously known as LinuxBIOS) images. . It can also be used to read the current existing BIOS/firmware from a flash chip. . Currently supported programmers include: . * internal (for in-system flashing in the mainboard) * dummy (virtual programmer for testing flashrom) * nic3com (for flash ROMs on 3COM network cards) * nicrealtek (for flash ROMs on Realtek and SMC 1211 network cards) * nicnatsemi (for flash ROMs on National Semiconductor DP838* network cards) * nicintel (for parallel flash ROMs on Intel 10/100Mbit network cards) * gfxnvidia (for flash ROMs on NVIDIA graphics cards) * drkaiser (for flash ROMs on Dr. Kaiser PC-Waechter PCI cards) * satasii (for flash ROMs on Silicon Image SATA/IDE controllers) * satamv (for flash ROMs on Marvell SATA controllers) * atahpt (for flash ROMs on Highpoint ATA/RAID controllers) * atavia (for flash ROMs on VIA VT6421A SATA controllers) * atapromise (for flash ROMs on Promise PDC2026x ATA/RAID controllers) * it8212 (for flash ROMs on ITE IT8212F ATA/RAID controller) * ft2232_spi (for SPI flash ROMs attached to an FT2232/FT4232H/FT232H family based USB SPI programmer), including the DLP Design DLP-USB1232H, FTDI FT2232H Mini-Module, FTDI FT4232H Mini-Module, openbiosprog-spi, Amontec JTAGkey/JTAGkey-tiny/JTAGkey-2, Dangerous Prototypes Bus Blaster, Olimex ARM-USB-TINY/-H, Olimex ARM-USB-OCD/-H, TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA), TUMPA Lite, GOEPEL PicoTAP, Google Servo v1/v2, and FIC OpenMoko Neo1973 Debug board. * serprog (for flash ROMs attached to a programmer speaking serprog), including AVR flasher by Urja Rannikko, AVR flasher by eightdot, Arduino Mega flasher by fritz, InSystemFlasher by Juhana Helovuo, and atmegaXXu2-flasher by Stefan Tauner. * buspirate_spi (for SPI flash ROMs attached to a Bus Pirate) * dediprog (for SPI flash ROMs attached to a Dediprog SF100) * rayer_spi (for SPI flash ROMs attached to a RayeR parport based programmer) * pony_spi (for SPI flash ROMs attached to a SI-Prog serial port bitbanging adapter) * nicintel_spi (for SPI flash ROMs on Intel Gigabit network cards) * ogp_spi (for SPI flash ROMs on Open Graphics Project graphics card) * linux_spi (for SPI flash ROMs accessible via /dev/spidevX.Y on Linux) * usbblaster_spi (for SPI flash ROMs attached to an Altera USB-Blaster) * nicintel_eeprom (for SPI EEPROMs on Intel Gigabit network cards) * mstarddc_spi (for SPI flash ROMs accessible through DDC in MSTAR-equipped displays) * pickit2_spi (for SPI flash ROMs accessible via Microchip PICkit2) * ch341a_spi (for SPI flash ROMs attached to WCH CH341A) Homepage: http://www.flashrom.org Package: initramfs-tools Priority: optional Section: utils Installed-Size: 53 Maintainer: Debian kernel team Architecture: all Version: 0.148.4+rpt2 Provides: linux-initramfs-tool Depends: initramfs-tools-core (= 0.148.4+rpt2), linux-base Suggests: bash-completion Conflicts: linux-initramfs-tool Filename: pool/main/i/initramfs-tools/initramfs-tools_0.148.4+rpt2_all.deb Size: 18832 MD5sum: b221d62d09f3a97b32f96f4ba7c7e0f0 SHA1: 1082aab33b25b1130cfd8ed9ccbb4e24f98cca3a SHA256: 9ce080ea9ae3eee48725d7bdb7d099ed1582c2d778e11c7d54fc652b6e5d680b SHA512: 0e3d8fefe4da259816bc2b9bf54d8e323ca2d87c53f0bc81632292077473b37a458c71411b8ffff11fa06cf36a1d497d2816b2c8fd3ffa3eadecc42ecb5c3e9f Description: generic modular initramfs generator (automation) This package builds a bootable initramfs for Linux kernel packages. The initramfs is loaded along with the kernel and is responsible for mounting the root filesystem and starting the main init system. Multi-Arch: foreign Package: initramfs-tools-bin Priority: optional Section: utils Installed-Size: 89 Maintainer: Debian kernel team Architecture: arm64 Source: initramfs-tools Version: 0.148.4+rpt2 Replaces: initramfs-tools-core (<< 0.148~) Depends: libc6 (>= 2.34) Breaks: initramfs-tools-core (<< 0.148~) Filename: pool/main/i/initramfs-tools/initramfs-tools-bin_0.148.4+rpt2_arm64.deb Size: 19330 MD5sum: 052c688fcd39f8f1fcac3440ed55bbb8 SHA1: 0769656d00004ea2808cb24128ebedf2debd1b06 SHA256: 2d317d1028d87a04bb9bf359a300e631a1222b31cd05cc6f337a5df644817cbd SHA512: bb9676e02b65bb2890f0d2d7d510e73aef65be1d0415a53e63955ad492a6205d0c6406bc4831c15661f3bc2c30059a83559616a332b72b150ad16e83f4459ddb Description: generic modular initramfs generator (binary tools) This package contains the unmkinitramfs program that can be used to unpack an initramfs image. Multi-Arch: foreign Package: initramfs-tools-core Priority: optional Section: utils Installed-Size: 166 Maintainer: Debian kernel team Architecture: all Source: initramfs-tools Version: 0.148.4+rpt2 Depends: coreutils (>= 8.24), cpio (>= 2.12), dracut-install, initramfs-tools-bin (>= 0.148.4+rpt2), klibc-utils (>= 2.0.4-8~), kmod, logsave | e2fsprogs (<< 1.45.3-1~), udev Recommends: zstd, busybox | busybox-static Suggests: bash-completion Breaks: miniramfs (<< 1.0.3~) Filename: pool/main/i/initramfs-tools/initramfs-tools-core_0.148.4+rpt2_all.deb Size: 56054 MD5sum: 9e5df9baac177d36d3694f4eb63c4a5e SHA1: 4db806d86123378a0e01340125226f67f873555e SHA256: 56c5dad97d96fcd08dcef0a10f33da7901ae84dbfb4194c271c108419c674bfe SHA512: 2eeed07a8716a656ca42d45d90ac7d1bf212ff1925bdaa7bd0085c9349d22f3597d29f1383a20dfa8dce5a38e738bca4e52b670c49b7d394f3413021e7380e81 Description: generic modular initramfs generator (core tools) This package contains the mkinitramfs program that can be used to create a bootable initramfs for a Linux kernel. The initramfs should be loaded along with the kernel and is then responsible for mounting the root filesystem and starting the main init system. Multi-Arch: foreign Package: kms++-utils Priority: optional Section: libs Installed-Size: 474 Maintainer: Serge Schneider Architecture: arm64 Source: kms++ Version: 0~git20250807.1813ada-1 Depends: libc6 (>= 2.38), libfmt10 (>= 10.1.1+ds1), libgcc-s1 (>= 3.0), libkms++0 (>= 0~git20250807.1813ada), libstdc++6 (>= 13.1) Filename: pool/main/k/kms++/kms++-utils_0~git20250807.1813ada-1_arm64.deb Size: 132394 MD5sum: f83059b22ca95da5a5a25fc25355f305 SHA1: c2b7cb35573b9f34ba5052f3a6a2886fce4879f0 SHA256: a4c2cfe1d6e9458d43c508344c2516b672033135d373392a646a3084fbcc7f11 SHA512: 804fef9758f8f13d24b1d8be692ec464bf7aa82b785c71e5e270fec830d9df781d655a99c836fd3c4cabb2392317bfaa8e911b0278f2e5b92bb62c3026a757f5 Description: C++ library for kernel mode setting - utilities C++11 library, utilities and python bindings for Linux kernel mode setting . This package contains: * kmsblank - blank screen(s) * kmstest - set modes and planes and show test pattern on crtcs/planes, and test page flips * kmsprint - print information about DRM objects * fbtest Homepage: https://github.com/tomba/kmsxx Multi-Arch: foreign Package: libasound2-data Priority: optional Section: libs Installed-Size: 200 Maintainer: Debian ALSA Maintainers Architecture: all Source: alsa-lib Version: 1.2.14-1+rpt1 Replaces: libasound2t64 (<< 1.2.14-1+rpt1) Recommends: alsa-ucm-conf, alsa-topology-conf Suggests: alsa-utils Breaks: libasound2t64 (<< 1.2.14-1+rpt1) Filename: pool/main/a/alsa-lib/libasound2-data_1.2.14-1+rpt1_all.deb Size: 24776 MD5sum: a1b8c2289243d4cbc406168372489668 SHA1: de361f8393f7e5a5d43f1b260b000c4801824155 SHA256: eaf61a314997458de73151d89094a12b46e2c7b5daa549bee7edb74a08c16d25 SHA512: 357c6f45504362f64e2cc9a30ca79f31556d055b7accd4545f9b1cfa66296265a857ec9812b5656a4fa1b9dc50db783549bb775beae773ffa096fa7eda0f2b70 Description: Configuration files and profiles for ALSA drivers This package contains configuration files for ALSA drivers. . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Multi-Arch: foreign Package: libasound2t64 Priority: optional Section: libs Installed-Size: 1269 Maintainer: Debian ALSA Maintainers Architecture: arm64 Source: alsa-lib Version: 1.2.14-1+rpt1 Replaces: libasound2 Provides: libasound2 (= 1.2.14-1+rpt1) Depends: libasound2-data (>= 1.2.14-1+rpt1), libc6 (>= 2.38) Suggests: libasound2-plugins (>= 1.0.24) Breaks: alsa-utils (<< 1.2.1), libasound2 (<< 1.2.14-1+rpt1) Filename: pool/main/a/alsa-lib/libasound2t64_1.2.14-1+rpt1_arm64.deb Size: 459912 MD5sum: 2230103b909f5c453fb7ca2010dab188 SHA1: c4b950aa912ce67ccc5bd30a4ff76c10ebde7560 SHA256: 3b5c810e01fea62213a18ef6f698949061396e80454c60c47f3021e8be117b19 SHA512: 7e35ef2f410578b647de4243effc678e84fbd31da3a9ea84046ed4a3ee4009db607935d8361b45f6207f0043ef02d24c9b066e06ab3e7a0c0bb824b5c0e4e74a Description: shared library for ALSA applications This package contains the ALSA library and its standard plugins, as well as the required configuration files. . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Multi-Arch: same Package: libatopology2t64 Priority: optional Section: libs Installed-Size: 153 Maintainer: Debian ALSA Maintainers Architecture: arm64 Source: alsa-lib Version: 1.2.14-1+rpt1 Replaces: libasound2t64 (<< 1.2.1.1), libatopology2 Provides: libatopology2 (= 1.2.14-1+rpt1) Depends: libasound2t64 (>= 1.2.7.1), libc6 (>= 2.38) Breaks: libasound2t64 (<< 1.2.1.1), libatopology2 (<< 1.2.14-1+rpt1) Filename: pool/main/a/alsa-lib/libatopology2t64_1.2.14-1+rpt1_arm64.deb Size: 60918 MD5sum: ec106ed9bdb9a64241195b2c2d125217 SHA1: 0732ebb295d53bb2a0e9d3d1dfdcc0d24f2569f1 SHA256: 94e30b66ba0650c2e414ea644bf10fff93e682a0ce05d5330897c855c0f6610b SHA512: 3c508ae354669219081d6d54403f9c40cea29a1e67b9198e97c103989518413426844a6ddaa32c57051803c8220c77148860e4dc18cb17dbb0541db74f055832 Description: shared library for handling ALSA topology definitions This package contains the ALSA topology library. . ALSA is the Advanced Linux Sound Architecture. Homepage: https://www.alsa-project.org/ Multi-Arch: same Package: libbluetooth3 Priority: optional Section: libs Installed-Size: 337 Maintainer: Debian Bluetooth Maintainers Architecture: arm64 Source: bluez Version: 5.82-1.1+rpt1 Depends: libc6 (>= 2.38) Filename: pool/main/b/bluez/libbluetooth3_5.82-1.1+rpt1_arm64.deb Size: 122664 MD5sum: e152a06e6382c8e78c1899ca432686a4 SHA1: 2b160538fb2fd81163d1d81064063fcec5516c98 SHA256: b42fe7f63674c5af9bd055151f69d3f69b4a418ef9ed63204ad153261d1d3e00 SHA512: f237c334bcd343293007e0f271efdebe571086352b0596328032328c27862b2e8b6f247908029cecd2af8246b6fbfcfae4af833eff4fe743171930a1b56633b4 Description: Library to use the BlueZ Linux Bluetooth stack BlueZ is the official Linux Bluetooth protocol stack. It is an Open Source project distributed under GNU General Public License (GPL). Homepage: http://www.bluez.org Multi-Arch: same Package: libc-bin Essential: yes Priority: required Section: libs Installed-Size: 2249 Maintainer: GNU Libc Maintainers Architecture: arm64 Source: glibc Version: 2.41-12+rpt1+deb13u3 Depends: libc6 (>> 2.41), libc6 (<< 2.42) Recommends: manpages Breaks: dh-lua (<< 27+nmu1~) Filename: pool/main/g/glibc/libc-bin_2.41-12+rpt1+deb13u3_arm64.deb Size: 766246 MD5sum: a00ee7a28bc266b3cc3f667032a48714 SHA1: a1189c06e8123963673d3e51fab90b5056e46501 SHA256: d009733969e70f6b33cc4b0327654a8d0c96179b4aadee02e068718cec53480e SHA512: c53e496f7ea01a2d71ee900ed3a5110aeceaffd9e420b10bb905f914301bd765e7ff44e557c7cc875b2184f7946ab7cad5d61e3c26429e6dcc0155919cacd9c8 Description: GNU C Library: Binaries This package contains utility programs related to the GNU C Library. . * getconf: query system configuration variables * getent: get entries from administrative databases * iconv, iconvconfig: convert between character encodings * ldd, ldconfig: print/configure shared library dependencies * locale, localedef: show/generate locale definitions * tzselect, zdump, zic: select/dump/compile time zones Homepage: https://www.gnu.org/software/libc/libc.html Multi-Arch: foreign Package: libc-dev-bin Priority: optional Section: libdevel Installed-Size: 166 Maintainer: GNU Libc Maintainers Architecture: arm64 Source: glibc Version: 2.41-12+rpt1+deb13u3 Depends: libc6 (>> 2.41), libc6 (<< 2.42) Recommends: manpages, manpages-dev Suggests: libc-devtools (>> 2.41) Filename: pool/main/g/glibc/libc-dev-bin_2.41-12+rpt1+deb13u3_arm64.deb Size: 63310 MD5sum: c34ae835e3c32d0f251efe60b9ba3e40 SHA1: 01b8a52ed2c812527c44d958a572f85755f6ef81 SHA256: e0b362a93f81ea052869096a0a38be47ca7bf67966586c7c79a60bc4f633c0d5 SHA512: c5f0fc0e862fde166a81ff3833b1c455de60fd7b32cfc8c815eb66bc64180dcd26a4b54479eae29bf93fefad730e8ec42515e8c0e155a7ac04c8eed76a6f798a Description: GNU C Library: Development binaries This package contains utility programs related to the GNU C Library development package. . * gencat: generate message catalogs Homepage: https://www.gnu.org/software/libc/libc.html Multi-Arch: foreign Package: libc-l10n Priority: standard Section: localization Installed-Size: 4739 Maintainer: GNU Libc Maintainers Architecture: all Source: glibc Version: 2.41-12+rpt1+deb13u3 Filename: pool/main/g/glibc/libc-l10n_2.41-12+rpt1+deb13u3_all.deb Size: 1653574 MD5sum: 9dc4f948d289b3078cc2e12e0577a357 SHA1: 52314ad249324eddd64fc7108f2b2e3383313b3c SHA256: 987abb7b9dc135a17f5868f81b01a94ca0a0fb34ca26d00a5fefd3881b392835 SHA512: fd4aaf770139d530eb03d0e679d957ee59f12b7be5db343c43abda125300fcc75363aff5ee99072ec850ef2cac3136b6f23bdc34c9294676517c18ecb2a20728 Description: GNU C Library: localization files This package contains the translation files for the GNU C library and utility programs. Homepage: https://www.gnu.org/software/libc/libc.html Multi-Arch: foreign Package: libc6 Priority: optional Section: libs Installed-Size: 23769 Maintainer: GNU Libc Maintainers Architecture: arm64 Source: glibc Version: 2.41-12+rpt1+deb13u3 Depends: libgcc-s1 Recommends: libidn2-0 (>= 2.0.5~) Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales, libnss-nis, libnss-nisplus Breaks: base-files (<< 13.3~), chrony (<< 4.2-3~), dhcpcd (<< 1:10.1.0-7~), fakechroot (<< 2.19-3.5), firefox (<< 91~), firefox-esr (<< 91~), gnumach-image-1.8-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-486-dbg (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486 (<< 2:1.8+git20210923~), gnumach-image-1.8-xen-486-dbg (<< 2:1.8+git20210923~), hurd (<< 1:0.9.git20220301-2), libamdhip64-5 (<< 5.7.1-5+b1), libhiprtc-builtins5 (<< 5.7.1-5+b1), librccl1 (<< 5.4.3-3+b1), libswupdate0.1 (<< 2024.12.1+dfsg-1+b3), locales (<< 2.41), locales-all (<< 2.41), lua-swupdate (<< 2024.12.1+dfsg-1+b3), nscd (<< 2.41), pd-scaf (<< 1:0.14.1+darcs20180201-6+b4), postgresql-15-pllua (<< 1:2.0.12-4), postgresql-17-pllua (<< 1:2.0.12-3+b2), python3-iptables (<< 1.0.0-2), python3-mrgingham (<< 1.25-1), python3-onnxruntime (<< 1.20.1+dfsg-2~), sysvinit (<< 3.09-2~), sysvinit-core (<< 3.09-2~), tinydns (<< 1:1.05-14), uwsgi-plugin-pypy3 (<< 0.0.2+b1), valgrind (<< 1:3.19.0-1~) Filename: pool/main/g/glibc/libc6_2.41-12+rpt1+deb13u3_arm64.deb Size: 5186294 MD5sum: 38685d13f7fa6d62dd0a731c90e46ef8 SHA1: 6c8549235b6b919f65241f4c5aa40b8cea309b38 SHA256: 6f23ea0769d9545710f7d690fd26d47539d2729b74a413704790f93483425656 SHA512: 64527d4da3a7217feae019d170bcddc9494c3f6ae826022947c723ae57dfa408233fd964e4494c4bd5b6765925e3321ff476f9e8b1234663d2c765fc76256994 Description: GNU C Library: Shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Homepage: https://www.gnu.org/software/libc/libc.html Multi-Arch: same Package: libc6-dev Priority: optional Section: libdevel Installed-Size: 10312 Maintainer: GNU Libc Maintainers Architecture: arm64 Source: glibc Version: 2.41-12+rpt1+deb13u3 Replaces: libc6 (<= 2.32-1) Provides: libc-dev (= 2.41-12+rpt1+deb13u3) Depends: libc6 (= 2.41-12+rpt1+deb13u3), libc-dev-bin (= 2.41-12+rpt1+deb13u3), linux-libc-dev, libcrypt-dev, rpcsvc-proto Suggests: glibc-doc, manpages-dev Conflicts: libc0.3-dev, libc6.1-dev Breaks: binutils (<< 2.38), catch (<< 1.12.2-0.1), heimdal-multidev (<= 7.7.0+dfsg-4), igblast (<= 1.19.0-1), libassimp-dev (<= 5.2.4~ds0-1), libasyncns-dev (<= 0.8-6+b2), libatm1-dev (<= 1:2.5.1-4), libaws20-dev (<= 20.2-2+b1), libboinc-app-dev (<= 7.20.2+dfsg-1), libbson-dev (<= 1.22.0-1), libc6-dev-arm64-cross (<< 2.41~), libcups2-dev (<= 2.4.2-1), libdeal.ii-dev (<= 9.4.0-1), libdkim-dev (<= 1:1.0.21-4+b2), libdolfin-dev-common (<= 2019.2.0~git20220407.d29e24d-5), libeckit-dev (<= 1.20.0-1), libfclib-dev (<= 3.1.0+dfsg-2), libfltk1.3-dev (<= 1.3.8-4+b1), libghc-resolv-dev (<= 0.1.2.0-3), libghc-resolv-prof (<= 0.1.2.0-3), libglib2.0-dev (<= 2.72.3-1), libgloox-dev (<= 1.0.24-2+b1), libhesiod-dev (<= 3.2.1-3.1+b1), libinfinity-0.7-dev (<= 0.7.2-1+b1), libinsighttoolkit4-dev (<= 4.13.3withdata-dfsg2-3+b1), libinsighttoolkit5-dev (<= 5.2.1-5+b1), libismrmrd-dev (<= 1.8.0-2), libldap-dev (<= 2.5.12+dfsg-2), liblog4cplus-dev (<= 2.0.7-1), libloudmouth1-dev (<= 1.5.4-1), libmgl-dev (<= 8.0.1-2), libmimalloc2.0 (<= 2.0.6+ds-1), libminc-dev (<= 2.4.03-5), libmongoc-dev (<= 1.22.1-1), libmrpt-ros1bridge-dev (<= 1:2.4.9+ds-4+b2), libmysqlclient-dev (<= 8.0.29-1), libnetcdf-dev (<= 1:4.9.0-3), libnetcdf-mpi-dev (<= 1:4.9.0-1), libnetcdf-pnetcdf-dev (<= 1:4.9.0-1), libnfsidmap-dev (<= 1:2.6.1-2), libns3-dev (<= 3.36.1+dfsg-4), libola-dev (<= 0.10.8.nojsmin-2), libopenafs-dev (<= 1.8.8.1-3), libopendkim-dev (<= 2.11.0~beta2-7), libopendmarc-dev (<= 1.4.2-1), libopenms-dev (<= 2.6.0+cleaned1-3+b1), libopenzwave1.6-dev (<= 1.6.1914+ds-1), libpg-query-dev (<= 13-2.1.2-2), librbl-dev (<= 2.11.0~beta2-7), libre-dev (<= 1.1.0-1+b1), libshishi-dev (<= 1.0.2-11), libslurm-dev (<= 21.08.8.2-1), libsocksd0-dev (<= 1.4.2+dfsg-7+b4), libspf2-dev (<= 1.2.10-7.1+b1), libstrophe-dev (<= 0.12.1-2), libtaningia-dev (<= 0.2.2-2+b1), libtrilinos-amesos-dev (<= 13.2.0-3), libtrilinos-amesos2-dev (<= 13.2.0-3), libtrilinos-anasazi-dev (<= 13.2.0-3), libtrilinos-aztecoo-dev (<= 13.2.0-3), libtrilinos-belos-dev (<= 13.2.0-3), libtrilinos-epetra-dev (<= 13.2.0-3), libtrilinos-epetraext-dev (<= 13.2.0-3), libtrilinos-galeri-dev (<= 13.2.0-3), libtrilinos-ifpack-dev (<= 13.2.0-3), libtrilinos-ifpack2-dev (<= 13.2.0-3), libtrilinos-intrepid-dev (<= 13.2.0-3), libtrilinos-intrepid2-dev (<= 13.2.0-3), libtrilinos-isorropia-dev (<= 13.2.0-3), libtrilinos-kokkos-dev (<= 13.2.0-3), libtrilinos-kokkos-kernels-dev (<= 13.2.0-3), libtrilinos-komplex-dev (<= 13.2.0-3), libtrilinos-ml-dev (<= 13.2.0-3), libtrilinos-moertel-dev (<= 13.2.0-3), libtrilinos-muelu-dev (<= 13.2.0-3), libtrilinos-nox-dev (<= 13.2.0-3), libtrilinos-phalanx-dev (<= 13.2.0-3), libtrilinos-pike-dev (<= 13.2.0-3), libtrilinos-piro-dev (<= 13.2.0-3), libtrilinos-pliris-dev (<= 13.2.0-3), libtrilinos-rol-dev (<= 13.2.0-3), libtrilinos-rtop-dev (<= 13.2.0-3), libtrilinos-rythmos-dev (<= 13.2.0-3), libtrilinos-sacado-dev (<= 13.2.0-3), libtrilinos-shylu-dev (<= 13.2.0-3), libtrilinos-stokhos-dev (<= 13.2.0-3), libtrilinos-stratimikos-dev (<= 13.2.0-3), libtrilinos-teko-dev (<= 13.2.0-3), libtrilinos-teuchos-dev (<= 13.2.0-3), libtrilinos-thyra-dev (<= 13.2.0-3), libtrilinos-tpetra-dev (<= 13.2.0-3), libtrilinos-trilinoscouplings-dev (<= 13.2.0-3), libtrilinos-triutils-dev (<= 13.2.0-3), libtrilinos-xpetra-dev (<= 13.2.0-3), libtrilinos-zoltan2-dev (<= 13.2.0-3), libvbr-dev (<= 2.11.0~beta2-7), libvisp-dev (<= 3.5.0-2+b1), libvotca-dev (<= 2022-3), libvtk6-dev (<= 6.3.0+dfsg2-8.1+b1), libvtk7-dev (<= 7.1.1+dfsg2-10.2), open-vm-tools-dev (<= 2:12.0.5-2), pidgin-librvp (<= 0.9.7cvs-3), proftpd-dev (<= 1.3.7d+dfsg-2), slurm-wlm-basic-plugins-dev (<= 21.08.8.2-1) Filename: pool/main/g/glibc/libc6-dev_2.41-12+rpt1+deb13u3_arm64.deb Size: 2356090 MD5sum: f545cac5e871f4d7a7730acc5880a271 SHA1: ef54c82e1043044fa9a976fa6bdf2f67dd08069b SHA256: 1d137f019dc138b61d048ec476188acc8b983db199f908417b60b16907cd84f2 SHA512: 529a2b68999eaeefafb000bcec07fd493d4eaf299fbd54c19e97113660892248d2430b9ec1bd87513e8471dab59eb411cfbd749112c5f91127879c28f7dc4446 Description: GNU C Library: Development Libraries and Header Files Contains the symlinks, headers, and object files needed to compile and link programs which use the standard C library. Homepage: https://www.gnu.org/software/libc/libc.html Multi-Arch: same Package: libcamera-ipa Priority: optional Section: libs Installed-Size: 5104 Maintainer: Serge Schneider Architecture: arm64 Source: libcamera Version: 0.7.1+rpt20260609-1 Replaces: libcamera0 Depends: libc6 (>= 2.38), libcamera0.7 (>= 0.7.1+rpt20260609), libgcc-s1 (>= 4.2), libpisp1 (>= 1.5.0), libstdc++6 (>= 14), libtensorflow-lite2.20.0 (>= 2.20.0) Recommends: awb-nn Breaks: libcamera0 Filename: pool/main/libc/libcamera/libcamera-ipa_0.7.1+rpt20260609-1_arm64.deb Size: 1092168 MD5sum: 0aa58efc35d87e6dbb045adef5387513 SHA1: f1954252b5a6d7107d0625a06cfc65488f925e38 SHA256: 807ae146c30fdacb5d8ade5312d4b3b477b5c02828c3a3026da515f3f3954ac8 SHA512: 4b12fae4ee60f468ffebc8ac24c0fcd7309531876166d9c4d7498c26e7d67bb662784e2da23920921f4cf4ad4baec1da2045f955ea50d60f66aca4c5fdf19eb1 Description: complex camera support library (IPA modules) libcamera is a complex camera support library which handles low-level control of the camera devices, providing a unified higher-level programming interface to the applications. . This package contains the libcamera IPA (Image Processing Algorithms) modules. Homepage: https://libcamera.org/ Multi-Arch: same Package: libcamera0.7 Priority: optional Section: libs Installed-Size: 2383 Maintainer: Serge Schneider Architecture: arm64 Source: libcamera Version: 0.7.1+rpt20260609-1 Replaces: libcamera0 Depends: libc6 (>= 2.38), libdw1t64 (>= 0.158), libgcc-s1 (>= 3.0), libgnutls30t64 (>= 3.7.3), liblttng-ust1t64 (>= 2.13.0), libpisp1 (>= 1.5.0), libstdc++6 (>= 14), libudev1 (>= 183), libyaml-0-2, libyuv0 (>= 0.0.1904), libcamera-ipa (= 0.7.1+rpt20260609-1) Breaks: libcamera0 Filename: pool/main/libc/libcamera/libcamera0.7_0.7.1+rpt20260609-1_arm64.deb Size: 852632 MD5sum: 885e0a9b6dfb5d41f037a5f8c74644b2 SHA1: 85aea63822402b071e52473af5db92027838a8ae SHA256: 48a32812d536d193f7c45a767589afacf923d474765aabd9a1ed30e8190624f8 SHA512: d0057d8629f9fb9ff92a8715dbab1f0f42a1c3665a39e55864a3763120b26255363d663a35c2f328dc6192f683c4bd3c8938c1e1bf9482063823a5b81c080876 Description: complex camera support library libcamera is a complex camera support library which handles low-level control of the camera devices, providing a unified higher-level programming interface to the applications. Homepage: https://libcamera.org/ Multi-Arch: same Package: libdrm-amdgpu1 Priority: optional Section: libs Installed-Size: 92 Maintainer: Debian X Strike Force Architecture: arm64 Source: libdrm Version: 2.4.131-1~bpo13+1+rpt2 Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.108) Filename: pool/main/libd/libdrm/libdrm-amdgpu1_2.4.131-1~bpo13+1+rpt2_arm64.deb Size: 27802 MD5sum: d72c43714a782f4031126828f9364b80 SHA1: 4c6e80380133050193fb03a77c52ee14e2664603 SHA256: 611320589ded2f327e6ee37ab9aa48d5231f88903bb8d4a4659526c215181da2 SHA512: 5a5e1d59e064f37b7565a1398b15c054fda7945bdfccbff3fd8f547389dcb5059d24a6244f737658e87b9e6b21a5eead373ca36752dc8d64172d1f906282c44a Description: Userspace interface to amdgpu-specific kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. Homepage: https://gitlab.freedesktop.org/mesa/drm/ Multi-Arch: same Package: libdrm-common Priority: optional Section: libs Installed-Size: 41 Maintainer: Debian X Strike Force Architecture: all Source: libdrm Version: 2.4.131-1~bpo13+1+rpt2 Filename: pool/main/libd/libdrm/libdrm-common_2.4.131-1~bpo13+1+rpt2_all.deb Size: 10666 MD5sum: 81de8f37837917aba509287b4d65af24 SHA1: 5c7e4684e8cb70e9908af847ca26d8a4fd66f357 SHA256: a18e44d2b1a940c68532039efbfc6556a9f8071f93c760b22cc9087aa602ad6c SHA512: b3643e3e7a957deb078804bb19b8be37b74ad0fbc570d6d2c4ffe0096bb9b153b7960430de43a51c8ca5fea026dbe179e0937ccf48f0c837afacc8748d66be2e Description: Userspace interface to kernel DRM services -- common files This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. . This package provides common files for libdrm. Homepage: https://gitlab.freedesktop.org/mesa/drm/ Multi-Arch: foreign Package: libdrm2 Priority: optional Section: libs Installed-Size: 159 Maintainer: Debian X Strike Force Architecture: arm64 Source: libdrm Version: 2.4.131-1~bpo13+1+rpt2 Depends: libdrm-common (>= 2.4.131-1~bpo13+1+rpt2), libc6 (>= 2.38) Filename: pool/main/libd/libdrm/libdrm2_2.4.131-1~bpo13+1+rpt2_arm64.deb Size: 48186 MD5sum: 507d40c2034873441473d6fea22c9145 SHA1: 26bb56f7c449d97a189405e42c249b06aa3b1465 SHA256: 4cc88ab407071ffa1ec3f341825730eb2759c13cbaf821b99a9f9782ecec6b1e SHA512: 2643596763f22752232c8a1cfb3642e3a5ccd89e60ae1d3681b22497665b7760ac0848cad4a5db9cfa757e73238546993ade53eed90590a9dc4c42ba55cd4d06 Description: Userspace interface to kernel DRM services -- runtime This library implements the userspace interface to the kernel DRM services. DRM stands for "Direct Rendering Manager", which is the kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is currently used on Linux to provide hardware-accelerated OpenGL drivers. . This package provides the runtime environment for libdrm. Homepage: https://gitlab.freedesktop.org/mesa/drm/ Multi-Arch: same Package: libdtovl0 Priority: optional Section: utils Installed-Size: 88 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20260601-1 Replaces: libraspberrypi-dev, libraspberrypi-doc, libraspberrypi0 Depends: libc6 (>= 2.17), libfdt1 (>= 1.7.2) Breaks: libraspberrypi-dev, libraspberrypi-doc, libraspberrypi0 Filename: pool/main/r/raspi-utils/libdtovl0_20260601-1_arm64.deb Size: 29732 MD5sum: 6ec7a3889aee07b07b1108635c64e0e2 SHA1: cb0b7f2a74105d1a04bc9da5df1dd93ce6b96722 SHA256: f7bfeda6a4349c7525d07d0e438273bfac3b8fed543869b198346e0f5b4318e5 SHA512: 32121754bb2b31612648b0acadc14e81c207c8d502e18f0766789beb542e875cb40a94359ca61391b3c0fb5d802d2206d82c24b41162ed4ac3614eb0e787319a Description: Library for manipulating Device Tree overlays A development library providing an API for manipulating device tree overlays . This library powers the dtmerge and dtoverlay utilities, providing functions for loading, merging, and applying device tree overlays, resolving fixups, handling parameters, and managing the device tree blob structure. . This package contains the shared library. Homepage: https://github.com/raspberrypi/utils Multi-Arch: same Package: libegl-mesa0 Priority: optional Section: libs Installed-Size: 439 Maintainer: Debian X Strike Force Architecture: arm64 Source: mesa Version: 25.0.7-2+rpt4 Provides: libegl-vendor Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.121), libexpat1 (>= 2.0.1), libgbm1 (= 25.0.7-2+rpt4), libwayland-client0 (>= 1.24.0), libwayland-server0 (>= 1.15.0), libx11-xcb1, libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0 (>= 1.3), libxcb-shm0, libxcb-xfixes0, libxcb1 (>= 1.6), mesa-libgallium (= 25.0.7-2+rpt4) Filename: pool/main/m/mesa/libegl-mesa0_25.0.7-2+rpt4_arm64.deb Size: 155906 MD5sum: 78bc6ecb8d3b56a3b9106a96dedff323 SHA1: ba6e106ddce7f892e0de56ca86d01fe0b7abf02f SHA256: e4116be1c054f0a257b5e3b672ec11bafb82ff410dabef10f07f33a7594925f2 SHA512: 3c8b6c7f6b6881f492e5a71b2aa052d119f5105c7972cc0aa7ffe61a68c7b6b15c8b76467ec7c8f7e0e989c175cc84d50212df5c2d5c29bd14985e079484dd5a Description: free implementation of the EGL API -- Mesa vendor library This package contains the EGL native platform graphics interface library. EGL provides a platform-agnostic mechanism for creating rendering surfaces for use with other graphics libraries, such as OpenGL|ES. . This package contains the Mesa vendor library for EGL. Homepage: https://mesa3d.org/ Multi-Arch: same Package: libgbm1 Priority: optional Section: libs Installed-Size: 185 Maintainer: Debian X Strike Force Architecture: arm64 Source: mesa Version: 25.0.7-2+rpt4 Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.121), libexpat1 (>= 2.0.1), libwayland-server0 (>= 1.15.0), mesa-libgallium (= 25.0.7-2+rpt4) Filename: pool/main/m/mesa/libgbm1_25.0.7-2+rpt4_arm64.deb Size: 53704 MD5sum: 2e410f117fe85f4e44f6c3dc6e770e7a SHA1: 4e54ad5195afa64fac0f21e8b0de1ec3bc43c877 SHA256: 13cfaa55c1a086684d64934515ac3abd813be48c279c001e71cb051dc281e2a9 SHA512: 08f8ffd65a7a56aeaa3aa8c1faafd8a7f479e1b3ccb728a0f800a702d3f969b4a86aededacbdacb872a463b50fce149b04064d0be04fae4cdc6bbc23e8305c04 Description: generic buffer management API -- runtime This package contains the GBM buffer management library. It provides a mechanism for allocating buffers for graphics rendering tied to Mesa. . GBM is intended to be used as a native platform for EGL on drm or openwfd. Homepage: https://mesa3d.org/ Multi-Arch: same Package: libgpiolib0 Priority: optional Section: utils Installed-Size: 151 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20260601-1 Depends: libc6 (>= 2.17) Filename: pool/main/r/raspi-utils/libgpiolib0_20260601-1_arm64.deb Size: 40786 MD5sum: 0d73ce181272dbf4f6a521765e411011 SHA1: c07c238c142e02d35043b27c173cdfd101cb66a8 SHA256: 3017714841ffe1746b3fcbd376e40448c4b30522f422d780ed62fd9799e20c30 SHA512: f82fe8395188ee8c3e3b870654631651134e387ae287b870dcfb397d3781b3d5b5019b9d053cb833f28fdc5e14f741f95c62a88d564746c1e74f363d61b0f9ec Description: GPIO library for Raspberry Pi devices A development library providing a user-space API for accessing and controlling GPIO pins on Raspberry Pi hardware. . The library supports runtime detection of GPIO controllers from Device Tree, referring to GPIOs by name or number, and provides both basic pin control and monitoring capabilities. . This package contains the shared library. Homepage: https://github.com/raspberrypi/utils Multi-Arch: same Package: libkms++0 Priority: optional Section: libs Installed-Size: 472 Maintainer: Serge Schneider Architecture: arm64 Source: kms++ Version: 0~git20250807.1813ada-1 Depends: libc6 (>= 2.38), libdrm2 (>= 2.4.101), libfmt10 (>= 10.1.1+ds1), libgcc-s1 (>= 3.0), libstdc++6 (>= 13.1) Filename: pool/main/k/kms++/libkms++0_0~git20250807.1813ada-1_arm64.deb Size: 139046 MD5sum: e41ef64894c8a2635d488c7421601be0 SHA1: ecdd242977081c23cc9a2866b1b3229bcd6ded28 SHA256: 1a22a36750d8133c1f30868c18c22ab3d5ac526f4183bfb050a34ee1c46da8db SHA512: 1162b164dad5fe0f6dd9965dc9918c4f4bc73833bc9e5b21bce4f144b2f12104d9580047e6cac7f893172f945a608b469032b8d37d80abfa0a4f8712a6c877c9 Description: C++ library for kernel mode setting C++11 library, utilities and python bindings for Linux kernel mode setting Homepage: https://github.com/tomba/kmsxx Multi-Arch: same Package: liblgpio1 Priority: optional Section: libs Installed-Size: 148 Maintainer: Serge Schneider Architecture: arm64 Source: lg-gpio Version: 0.2.2-1~rpt1+trixie Depends: libc6 (>= 2.34) Filename: pool/main/l/lg-gpio/liblgpio1_0.2.2-1~rpt1+trixie_arm64.deb Size: 42110 MD5sum: c06aaf02f8c6640a6c1db5549c2282db SHA1: aaf35e0c33dc6e7748d339ce97e375de0d8db88b SHA256: d4cbc085dbdc9f7acd2bb9bdbbacf3d5b476e814d1aa269ed26dcf10b24cba25 SHA512: 2eda9eb09c8bd1429995f0c8f0ba2b065b66bb17b69ce80e02b6fe508ff9057be7b8f0ab93afa929d2f2e288deb763764e4636bf8f39c08ac899c71955a7e9ec Description: Control GPIO pins via gpiochip devices - shared libraries The lgpio library is a fully featured library for controlling the GPIO pins of the local board. It includes facilities for software PWM, callbacks on level change, I2C, SPI, and UART wrappers. . This package contains the lgpio library itself. Homepage: https://abyz.me.uk/lg Multi-Arch: same Package: libnetplan1 Priority: optional Section: libs Installed-Size: 417 Maintainer: Debian Networking Team Architecture: arm64 Source: netplan.io Version: 1.1.2-7+rpt1 Depends: libc6 (>= 2.38), libglib2.0-0t64 (>= 2.76.0), libuuid1 (>= 2.16), libyaml-0-2 Filename: pool/main/n/netplan.io/libnetplan1_1.1.2-7+rpt1_arm64.deb Size: 115104 MD5sum: c6a69948d0dccbf7fbc072fa1a4a2a83 SHA1: 836adb4aeaf8a971c59691453f6812f8db1e248f SHA256: 9057b387f4b9b89d93265f1e8e89acf585705bd711a7d686b4fe06d000c44624 SHA512: bb94561f9b1aa07e7a4f2e98d4cf63c7ee02b6c54cda2351892c0c642bdb04f47d232d38547db30ee67499295499d9cd89e868db6ad1e55bba1b8585b8086bae Description: Declarative network configuration runtime library Netplan reads YAML network configuration files which are written by administrators, installers, cloud image instantiations, or other OS deployments. During early boot it then generates backend specific configuration files in /run to hand off control of devices to a particular networking daemon. . Currently supported backends are networkd and NetworkManager. . This package contains the necessary runtime library files. Homepage: https://netplan.io/ Multi-Arch: same Package: libnm0 Priority: optional Section: libs Installed-Size: 1789 Maintainer: Utopia Maintenance Team Architecture: arm64 Source: network-manager Version: 1.52.1-1+rpt4 Depends: libc6 (>= 2.34), libglib2.0-0t64 (>= 2.44.0), libgnutls30t64 (>= 3.7.2), libudev1 (>= 183) Filename: pool/main/n/network-manager/libnm0_1.52.1-1+rpt4_arm64.deb Size: 425516 MD5sum: fb4df11a9b631fd2731940ff5da6d5be SHA1: 44b1976b36bd3b9e6db4ec057f08c4b9c5734007 SHA256: 3e007f8a6e5093b1777a077dfd4124851bd326be1303fc29526e624a8c1aacf3 SHA512: 496edc181875319e4d18ff535be98b488befec2b2f7e91238274c01ef1132647e54e65c22427014236e629bc458554a8ea6c75e3b27cc519d24d0af44bc9407e Description: GObject-based client library for NetworkManager NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, Wi-Fi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package contains a convenience library to ease the access to NetworkManager. Homepage: https://networkmanager.dev/ Multi-Arch: same Package: libpam-chksshpwd Priority: optional Section: admin Installed-Size: 86 Maintainer: Simon Long Architecture: arm64 Version: 2.0 Depends: libc6 (>= 2.33), libcrypt1 (>= 1:4.1.0), libpam0g, libpam-runtime, gettext-base Filename: pool/main/libp/libpam-chksshpwd/libpam-chksshpwd_2.0_arm64.deb Size: 5552 MD5sum: 067168e001265d2da0d46f2637612fc6 SHA1: 315122f53e01a1e83a8a324275a9448753ce5a2d SHA256: 9611df23db0ae3a46fae2200c346af9b7175897a937f935cda2c0256c59f7060 SHA512: f6fb275740f7fb1b234f018e35e0a45c848190e61864384561e82fb0231a4ce38bf37d73c26c412a0c14bdb647a7105329c37bd660f8c7e13c6e9624e3b7a91b Description: PAM module to enable SSH password checking support This package contains libpam_chkpasswd, a PAM module that checks to see if the default password has been changed when SSH is enabled. Multi-Arch: same Package: libpisp-common Priority: optional Section: libs Installed-Size: 31 Maintainer: Serge Schneider Architecture: all Source: libpisp Version: 1.5.0-1 Filename: pool/main/libp/libpisp/libpisp-common_1.5.0-1_all.deb Size: 8980 MD5sum: 3f4b60ece9909d1c3489d45b59517240 SHA1: 34ecbd72a71235767fa74086f552f688d77b032f SHA256: 660642f7426fe0dc1aa2f50b8ef6b9ac3ab39f90655fd0a377d8f99514798a2b SHA512: fa1fca1e761d8de8fd07f372c5c8db20463eb47a0037bd5670373e7183d587c50cd2fbb8150f9a9c4a53993a4b71248c6ae6c8afcfc02d14341a4c8dcc8477b6 Description: Helper library for the PiSP hardware block (data files) This library provides helper functions to generate hardware configuration for the PiSP hardware blocks. The configuration includes a hardware register specification together with image tiling data to be programmed into the PiSP hardware to fully process a given Bayer or RGB/YUV image with a set of user defined configuration. . This package contains the architecture-independent data files. Homepage: https://github.com/raspberrypi/libpisp Multi-Arch: foreign Package: libpisp1 Priority: optional Section: libs Installed-Size: 859 Maintainer: Serge Schneider Architecture: arm64 Source: libpisp Version: 1.5.0-1 Depends: libpisp-common (= 1.5.0-1), libboost-log1.83.0 (>= 1.83.0), libboost-thread1.83.0 (>= 1.83.0), libc6 (>= 2.38), libgcc-s1 (>= 3.0), libstdc++6 (>= 14) Filename: pool/main/libp/libpisp/libpisp1_1.5.0-1_arm64.deb Size: 310678 MD5sum: 3db041102e62932580a6bf6ec2949383 SHA1: fb7b2ef20fa57e2347736ee577d66dacc804d21a SHA256: a596407a42d5877117de44c8be359bce6a497c78764c5fa03c4e78fe6c98538a SHA512: 10252cf3a76766e6dcd8408c45f65139729f3f2a5c1845e50697bb4f14eebf3bffbc282d69daa9acd7af09fbcab4a10ea890c1935c2af1314a158f4835f55386 Description: Helper library for the PiSP hardware block (runtime) This library provides helper functions to generate hardware configuration for the PiSP hardware blocks. The configuration includes a hardware register specification together with image tiling data to be programmed into the PiSP hardware to fully process a given Bayer or RGB/YUV image with a set of user defined configuration. . This package contains the runtime library. Homepage: https://github.com/raspberrypi/libpisp Multi-Arch: same Package: librpicam-app1 Priority: optional Section: video Installed-Size: 792 Maintainer: Serge Schneider Architecture: arm64 Source: rpicam-apps Version: 1.12.0-1 Depends: libboost-program-options1.83.0 (>= 1.83.0), libc6 (>= 2.38), libcamera0.7 (>= 0.7.1+rpt20260429), libexif12 (>= 0.6.21-1~), libgcc-s1 (>= 3.0), libjpeg62-turbo (>= 1.3.1), libpng16-16t64 (>= 1.6.46), libstdc++6 (>= 14), libtiff6 (>= 4.5.0~rc1) Filename: pool/main/r/rpicam-apps/librpicam-app1_1.12.0-1_arm64.deb Size: 281654 MD5sum: 4f8bba5bf87b11719c645b4a16b2e235 SHA1: 8b3e37f0fe1098e33f8b14727b7d532295a2961e SHA256: 3ca8fea4cbae2229558f90f7bff6d64b6e4da6650668fcedf81b57275b9a90f8 SHA512: f7fee20d9fbbbd232c2e1c36bb44b19bdf915eaf58fdaba33fd3d0eb6bab6424ccf58a06221d24bf5b4b8ed88f3d3fc4b7c5f143e66dd977fc50fc723a74f961 Description: Framework for rpicam-apps camera applications The rpicam-apps libary is the core framework used by the rpicam-apps suite of official command-line camera applications developed for Raspberry Pi, built on the libcamera framework. Custom camera applications can be built using this library. . This package contains the shared library. Homepage: https://github.com/raspberrypi/rpicam-apps/ Multi-Arch: same Package: librpifwcrypto0 Priority: optional Section: utils Installed-Size: 86 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20260601-1 Depends: libc6 (>= 2.17) Filename: pool/main/r/raspi-utils/librpifwcrypto0_20260601-1_arm64.deb Size: 13500 MD5sum: bb0f5568c1a37bfd3d9ac140b75440d2 SHA1: 68b0c451695890ea26cc3e9586c9d69ac35ef730 SHA256: d1e9356be17c9529c493a0e16c723c2c493721ec52e96aef9266a9267f99f95c SHA512: f1ad7a8d32da917659101133b21ffcbc83ab18ded2f34e58bae6fc58a972b001bf76cfe1e4bdcf339322744e211918cef16cdaa67e5c218d5adcc8895384e549 Description: Raspberry Pi Firmware Cryptography service library A mailbox-based API library that enables cryptographic operations through firmware without exposing private keys to userspace. Provides ECDSA P-256 signing and SHA256 HMAC functionality using device OTP keys. . This package contains the shared library. Homepage: https://github.com/raspberrypi/utils Multi-Arch: same Package: libssl3t64 Priority: optional Section: libs Installed-Size: 8016 Maintainer: Debian OpenSSL Team Architecture: arm64 Source: openssl Version: 3.5.6-1~deb13u2+rpt1 Replaces: libssl3 Provides: libssl3 (= 3.5.6-1~deb13u2+rpt1) Depends: libc6 (>= 2.38), libzstd1 (>= 1.5.5), zlib1g (>= 1:1.1.4), openssl-provider-legacy Breaks: freeradius (<< 3.2.7+dfsg-1+deb13u1), libssl3 (<< 3.5.6-1~deb13u2+rpt1), openssh-client (<< 1:9.4p1), openssh-server (<< 1:9.4p1), python3-m2crypto (<< 0.38.0-4) Filename: pool/main/o/openssl/libssl3t64_3.5.6-1~deb13u2+rpt1_arm64.deb Size: 3436456 MD5sum: ed7cb1729b4cc3fe4179d998b51b7514 SHA1: b70889b9893d23158980c288aea52dd33bebf78e SHA256: 31a008c2abe0f1f8ac2c8775ed1ee5ec9e1d4485d21cd25351f8c5604828c786 SHA512: 91467123b373bd310dc0610aba90edc0ee7246b130d46fb8367dafef8533f197478bf1d04953ed413b72864e3fa18ac36ef9e69ad1fc96d673e094e3cb65af01 Description: Secure Sockets Layer toolkit - shared libraries This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It provides the libssl and libcrypto shared libraries. Homepage: https://openssl-library.org Multi-Arch: same Package: libtensorflow-lite2.20.0 Priority: optional Section: libs Installed-Size: 5056 Maintainer: Debian Deep Learning Team Architecture: arm64 Source: tensorflow Version: 2.20.0-1+rpt1 Depends: libabsl20240722 (>= 20240722.0-1), libc6 (>= 2.38), libcpuinfo0 (>= 0.0~git20220617.082deff-2), libfarmhash0 (>= 0~git20190513.0d859a8), libgcc-s1 (>= 4.0), libstdc++6 (>= 13.1) Filename: pool/main/t/tensorflow/libtensorflow-lite2.20.0_2.20.0-1+rpt1_arm64.deb Size: 1427832 MD5sum: 8599b6e176af61bf926b9cc2264d2893 SHA1: df2aa2cfcd72549524e9031c183c6dfc3795928a SHA256: 147f938692eb5856ac95f94e6b65c85eb30f9d5e6ee3f39e358b47869d24202b SHA512: ebf1f5103edc7b6195d9565977f7a98b480aa8a9d492a36f0f3d7005de4ffc4d72595fa65bca58dfb316f5ea7a693d176de042cbdbb7b7a7e40d2601e430533a Description: Computation using data flow graphs for scalable machine learning (shared lib) TensorFlow is an open source software library for numerical computation using data flow graphs. The graph nodes represent mathematical operations, while the graph edges represent the multidimensional data arrays (tensors) that flow between them. This flexible architecture enables you to deploy computation to one or more CPUs or GPUs in a desktop, server, or mobile device without rewriting code. . This package provides the tensorflow-lite shared library. Homepage: https://tensorflow.org/ Multi-Arch: same Package: libwayland-client0 Priority: optional Section: libs Installed-Size: 150 Maintainer: Debian X Strike Force Architecture: arm64 Source: wayland Version: 1.24.0-2~bpo13+1~rpt1 Depends: libc6 (>= 2.38), libffi8 (>= 3.4) Filename: pool/main/w/wayland/libwayland-client0_1.24.0-2~bpo13+1~rpt1_arm64.deb Size: 33542 MD5sum: 37d924f8758ef556418d5182a49407a6 SHA1: 78adb18fe503368728b920a7be37a69a4948a64c SHA256: 6ba34ab53ddf12d8d959512a7bbf467cd8f5a2eb6d2ff02f665769c18a2dcc68 SHA512: 36fea442a226d57f5e1ba50a7bf3562733ec36a8b3925d72a000f5d68847a051a931f9dc286bdbcaf76ae6d252eab71ce84fbff340536062dfa4bf3c56c26d77 Description: wayland compositor infrastructure - client library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the client side of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Multi-Arch: same Package: libwayland-server0 Priority: optional Section: libs Installed-Size: 153 Maintainer: Debian X Strike Force Architecture: arm64 Source: wayland Version: 1.24.0-2~bpo13+1~rpt1 Depends: libc6 (>= 2.38), libffi8 (>= 3.4) Filename: pool/main/w/wayland/libwayland-server0_1.24.0-2~bpo13+1~rpt1_arm64.deb Size: 42408 MD5sum: 6fbc236dc6343cedf16e5e1ade6e5822 SHA1: 1817d1b36898560672a92373f9ac7ca3bdd59d8a SHA256: 05858aaf843a23ce4de7f2f5884a0689967ab2af23ed1ae9086a08977155845f SHA512: 83e4b23d7265e97c811ed52ab69fc0d05b57025cea43098e7394b55a1906a3259f94e82908cbb6df1bc9d2ef0bf89bb86d4401c0a0f2a550251abebd2379bb0e Description: wayland compositor infrastructure - server library Wayland is a protocol for a compositor to talk to its clients as well as a C library implementation of that protocol. The compositor can be a standalone display server running on Linux kernel modesetting and evdev input devices, an X application, or a wayland client itself. The clients can be traditional applications, X servers (rootless or fullscreen) or other display servers. . This package ships the library that implements the server side of the Wayland protocol. Homepage: https://wayland.freedesktop.org/ Multi-Arch: same Package: linux-base-6.18.34+rpt-rpi-2712 Priority: optional Section: kernel Installed-Size: 973 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Filename: pool/main/l/linux/linux-base-6.18.34+rpt-rpi-2712_6.18.34-1+rpt1_arm64.deb Size: 965200 MD5sum: 1dfe11c4ca2f3ae9b31c2d0f7a1dd100 SHA1: c0d58ba6e414e343edaecf4e2d0a8a35cc75f6f7 SHA256: a78a5094e302be30cb10a69d4fa9a7372ddf0e4a6c915bbb63cdbef99dce7d76 SHA512: f57ef422e1a92e4603b6d246c8b600bf911fd7fa11c60c2762d5293e00543a602e928f9de2bd2d82597e8fb99b1d4f0ac197011347d5849e5d2c11cab6f37290 Description: Linux for Raspberry Pi 2712 (dummy package) This package contains files common to all Linux kernel packages. Homepage: https://github.com/raspberrypi/linux/ Package: linux-base-6.18.34+rpt-rpi-v8 Priority: optional Section: kernel Installed-Size: 973 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Filename: pool/main/l/linux/linux-base-6.18.34+rpt-rpi-v8_6.18.34-1+rpt1_arm64.deb Size: 965200 MD5sum: 1e8b3e96129b149dd626f3f47e172a61 SHA1: b06079f0f84e492ddcfd372acd9bafa67849c4fe SHA256: 7de81f859c3cf314f5bdc767a3a341767ad27d3bd4ab8bcb9910abf5d83cd0a4 SHA512: 7ba914ef6bc460d1f21c1b2875053d7c5ed50a3bf10ff709b97fe6d1495cdbd95ba1be46250cb815386f75fac2ce6a0b22521693cefc3ad1ee9a1e40c422cd37 Description: Linux for Raspberry Pi v8 (dummy package) This package contains files common to all Linux kernel packages. Homepage: https://github.com/raspberrypi/linux/ Package: linux-base-rpi-2712 Priority: optional Section: kernel Installed-Size: 9 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: linux-base-6.18.34+rpt-rpi-2712 (= 1:6.18.34-1+rpt1) Filename: pool/main/l/linux/linux-base-rpi-2712_6.18.34-1+rpt1_arm64.deb Size: 1184 MD5sum: bd80c8f8ee09ede98def3146746e985c SHA1: 826c07d58b75359ec5ab03c004ba55ec28b9484e SHA256: 48949fce339a0eb8b9c3a8f43a0fbfeaabf7e635525990e76f21e0361e95d8c2 SHA512: 5fdb0748fb108d3fd611aa097e000f613e9c3fd9e8fac172091e330d97d41f3a826659d782e2e3444023a062c0369b303af23e24649c2441cec13dcbf3220345 Description: Linux for Raspberry Pi 2712 (dummy package) This package contains files common to all Linux kernel packages. Homepage: https://github.com/raspberrypi/linux/ Package: linux-base-rpi-v8 Priority: optional Section: kernel Installed-Size: 9 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: linux-base-6.18.34+rpt-rpi-v8 (= 1:6.18.34-1+rpt1) Filename: pool/main/l/linux/linux-base-rpi-v8_6.18.34-1+rpt1_arm64.deb Size: 1184 MD5sum: eddf5ae26db29d803c45527911c51a52 SHA1: df5daa51b0fa0ac494203f4b9ac6fd0f032831dd SHA256: 96a138cb58f575dc204b0a4fb221308ab80406d6d35a3948e656812fc91710ca SHA512: 0836980546cd734b154fed03afb60d7a4c321dac12f8f3116c8e7e156d93057dd753b186d57a27cbfb1d63322185186f34d110cab51b8d5d53d854778243bd09 Description: Linux for Raspberry Pi v8 (dummy package) This package contains files common to all Linux kernel packages. Homepage: https://github.com/raspberrypi/linux/ Package: linux-headers-6.12.75+rpt-common-rpi Priority: optional Section: kernel Installed-Size: 47634 Maintainer: Serge Schneider Architecture: all Source: linux Version: 1:6.12.75-1+rpt1 Filename: pool/main/l/linux/linux-headers-6.12.75+rpt-common-rpi_6.12.75-1+rpt1_all.deb Size: 8804428 MD5sum: daf2f83adbba680b75ee10e4cb462ba4 SHA1: 3a41b60e89e1cc7b463036b2599e6c11d37bf94a SHA256: 5d4320e36d1b0a2ec4ac7e7e46f946ed6972cd3445e987284e8de5450599147a SHA512: 1a63bdaf095e3745006708eb3c33ef3eae18aff12df803d6d4771786941d1ccb0741e616d86fdb0615414177db9fd3f72f63c5f2903c6a9ab7ccdf28856a8cda Description: Common header files for Linux 6.12.75+rpt-rpi This package provides the common kernel header files for Linux kernel version 6.12.75+rpt with the Raspberry Pi featureset, generally used for building out-of-tree kernel modules. These files are going to be installed into /usr/src/linux-headers-6.12.75+rpt-common-rpi. . To obtain a complete set of headers you also need to install the linux-headers-6.12.75+rpt-(flavour) package, matching the flavour of the kernel you intend the build for. Homepage: https://github.com/raspberrypi/linux/ Multi-Arch: foreign Package: linux-headers-6.12.75+rpt-rpi-2712 Priority: optional Section: kernel Installed-Size: 3513 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.12.75-1+rpt1 Depends: linux-headers-6.12.75+rpt-common-rpi (= 1:6.12.75-1+rpt1), linux-image-6.12.75+rpt-rpi-2712 (= 1:6.12.75-1+rpt1) | linux-image-6.12.75+rpt-rpi-2712-unsigned (= 1:6.12.75-1+rpt1), linux-kbuild-6.12.75+rpt, gcc-14 Filename: pool/main/l/linux/linux-headers-6.12.75+rpt-rpi-2712_6.12.75-1+rpt1_arm64.deb Size: 1385432 MD5sum: 2ac8d3c5b866281315b32b2a0e94b600 SHA1: 6268ec104746756b72fa545508786861cc61987b SHA256: e40a8ccb2fc51f3d6bcdaf067f9fa6576935a8c0d0d828533b56ba68a2e78871 SHA512: b50e894f317b334a74cf2366982a903ceb832f3b4779ab9ac9621a920518ce0db8fd149ccbe89afa7bb0cefaea05b5571d36d65d9dee0ef82e4f43047e8d9096 Description: Header files for Linux 6.12.75+rpt-rpi-2712 This package provides the architecture-specific kernel header files for Linux kernel 6.12.75+rpt-rpi-2712, generally used for building out-of-tree kernel modules. These files are going to be installed into /usr/src/linux-headers-6.12.75+rpt-rpi-2712, and can be used for building modules that load into the kernel provided by the linux-image-6.12.75+rpt-rpi-2712 package. Homepage: https://github.com/raspberrypi/linux/ Package: linux-headers-6.12.75+rpt-rpi-v8 Priority: optional Section: kernel Installed-Size: 3513 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.12.75-1+rpt1 Depends: linux-headers-6.12.75+rpt-common-rpi (= 1:6.12.75-1+rpt1), linux-image-6.12.75+rpt-rpi-v8 (= 1:6.12.75-1+rpt1) | linux-image-6.12.75+rpt-rpi-v8-unsigned (= 1:6.12.75-1+rpt1), linux-kbuild-6.12.75+rpt, gcc-14 Filename: pool/main/l/linux/linux-headers-6.12.75+rpt-rpi-v8_6.12.75-1+rpt1_arm64.deb Size: 1385532 MD5sum: b4ca1e91ea552c7477a0f90889034736 SHA1: 398248853b5cdab041c641d0581b4ee8f0a8396e SHA256: c58318af4e05a8bc52a0eb48bb95e9e6e642257f0f4e2af121589eb399ecc4ca SHA512: 05cf1dbe2d2bbe746cafb93e5c06f17a1f48dd702b731b1da57f129f726f9be4537835e84a4152c248ec8be4cfb33139322da3feb8a5031a339949f1ccd33585 Description: Header files for Linux 6.12.75+rpt-rpi-v8 This package provides the architecture-specific kernel header files for Linux kernel 6.12.75+rpt-rpi-v8, generally used for building out-of-tree kernel modules. These files are going to be installed into /usr/src/linux-headers-6.12.75+rpt-rpi-v8, and can be used for building modules that load into the kernel provided by the linux-image-6.12.75+rpt-rpi-v8 package. Homepage: https://github.com/raspberrypi/linux/ Package: linux-headers-6.18.34+rpt-common-rpi Priority: optional Section: kernel Installed-Size: 50592 Maintainer: Serge Schneider Architecture: all Source: linux Version: 1:6.18.34-1+rpt1 Filename: pool/main/l/linux/linux-headers-6.18.34+rpt-common-rpi_6.18.34-1+rpt1_all.deb Size: 9263260 MD5sum: 0b45ee8465680e28953a16556a8d0f7f SHA1: 8608245b012566313d9626e0e42d5881e029d330 SHA256: 7cf03fcbf6c0ed4e511e4566e6879c1e550a7dc8acb88645dd1d3e4a5b258096 SHA512: 458d6b998407a8d9140226eb9203d7026c7ff4b08917f49343cd8998d4a70d37dc38a722dd426bc11499815074d9bc38c3eed2571646f73a81e8a1f9155cfaea Description: Common header files for Linux 6.18.34+rpt-rpi This package provides the common kernel header files for Linux kernel version 6.18.34+rpt with the Raspberry Pi featureset, generally used for building out-of-tree kernel modules. These files are going to be installed into /usr/src/linux-headers-6.18.34+rpt-common-rpi. . To obtain a complete set of headers you also need to install the linux-headers-6.18.34+rpt-(flavour) package, matching the flavour of the kernel you intend the build for. Homepage: https://github.com/raspberrypi/linux/ Multi-Arch: foreign Package: linux-headers-6.18.34+rpt-rpi-2712 Priority: optional Section: kernel Installed-Size: 2951 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: gcc-14-for-host, linux-base (>= 4.12~), linux-base-6.18.34+rpt-rpi-2712 (= 1:6.18.34-1+rpt1), linux-headers-6.18.34+rpt-common-rpi (= 1:6.18.34-1+rpt1), linux-kbuild-6.18.34+rpt Filename: pool/main/l/linux/linux-headers-6.18.34+rpt-rpi-2712_6.18.34-1+rpt1_arm64.deb Size: 436532 MD5sum: 0f2b7a627d4ff51a61980be7d3920475 SHA1: 2cc48374e14c5730e5b5fbb1fd849bc3cea8a1af SHA256: b64f28dfa4c8fe13d2ea1b633e61e710c89661c74e5a799ff5a9df9cc85b91d0 SHA512: 06101213549751fd65f3a2ba9ac8df8236ae5a60d300463989a28f4a9309c8cd62ef403e2fb6a7706f20f0be403dbc26728910f20fb0c339e5003c8667a2831e Description: Header files for Linux 6.18.34+rpt-rpi-2712 This package provides the architecture-specific kernel header files for Linux kernel 6.18.34+rpt-rpi-2712, generally used for building out-of-tree kernel modules. These files are going to be installed into /usr/src/linux-headers-6.18.34+rpt-rpi-2712, and can be used for building modules that load into the kernel provided by the linux-image-6.18.34+rpt-rpi-2712 package. Homepage: https://github.com/raspberrypi/linux/ Package: linux-headers-6.18.34+rpt-rpi-v8 Priority: optional Section: kernel Installed-Size: 2951 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: gcc-14-for-host, linux-base (>= 4.12~), linux-base-6.18.34+rpt-rpi-v8 (= 1:6.18.34-1+rpt1), linux-headers-6.18.34+rpt-common-rpi (= 1:6.18.34-1+rpt1), linux-kbuild-6.18.34+rpt Filename: pool/main/l/linux/linux-headers-6.18.34+rpt-rpi-v8_6.18.34-1+rpt1_arm64.deb Size: 436332 MD5sum: a5fcbe0f451bf00a6f1294de6c7611d1 SHA1: bb19cf60a9d6f1fc293f9e8cef2718fc757e3bcf SHA256: 103b388883d2b88b9d8ec5678430ee79dcc73a6cd574af42ec41f80dead0db70 SHA512: 34a769724b7cf3bdc19ca69aed732e9d0a598979facb39ebb56389b5e5f1604844599c8f842a09877c27838aaa06a50390d867d9f8c3e9d4295e6568fd2d323c Description: Header files for Linux 6.18.34+rpt-rpi-v8 This package provides the architecture-specific kernel header files for Linux kernel 6.18.34+rpt-rpi-v8, generally used for building out-of-tree kernel modules. These files are going to be installed into /usr/src/linux-headers-6.18.34+rpt-rpi-v8, and can be used for building modules that load into the kernel provided by the linux-image-6.18.34+rpt-rpi-v8 package. Homepage: https://github.com/raspberrypi/linux/ Package: linux-headers-rpi-2712 Priority: optional Section: kernel Installed-Size: 10 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: linux-base-rpi-2712 (= 1:6.18.34-1+rpt1), linux-headers-6.18.34+rpt-rpi-2712 (= 1:6.18.34-1+rpt1) Filename: pool/main/l/linux/linux-headers-rpi-2712_6.18.34-1+rpt1_arm64.deb Size: 1160 MD5sum: 8418998127d2fc987f20c09fe93c38c6 SHA1: e5e6d6cdef29920a51f46ba96f0e0a87d525cb4b SHA256: 89257d5d124fe71a4a188caa45902004a081701cb929a0a8a6c2a488333165ab SHA512: 4b209f229f353c855246f459135fd34ea2500e55c3d1f659b24cfc991876d7bedaef0f3f312eb6bde481b373fba008d9faa2b284bf05056e12255ca35e3dda36 Description: Header files for Linux rpi-2712 configuration (meta-package) This package depends on the architecture-specific header files for the latest Linux kernel rpi-2712 configuration. Homepage: https://github.com/raspberrypi/linux/ Package: linux-headers-rpi-v8 Priority: optional Section: kernel Installed-Size: 10 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: linux-base-rpi-v8 (= 1:6.18.34-1+rpt1), linux-headers-6.18.34+rpt-rpi-v8 (= 1:6.18.34-1+rpt1) Filename: pool/main/l/linux/linux-headers-rpi-v8_6.18.34-1+rpt1_arm64.deb Size: 1164 MD5sum: 2e812b6c92b236b5509cd6e6a66111e8 SHA1: fbbc1159f8c8e667afb30d97cf52a8355d6aad45 SHA256: 9f02ea587460693f4a914b2788fa8009b8178966c7d57e428ca7119376b90ee2 SHA512: 0e549f3f14a01747dea6f214986075375cd6fc4ca187193dbda2c4518c6d7f73dead51274a27d49fd68bfa004fc42bdd92d04da0c08ae4403d76ca917cb0b057 Description: Header files for Linux rpi-v8 configuration (meta-package) This package depends on the architecture-specific header files for the latest Linux kernel rpi-v8 configuration. Homepage: https://github.com/raspberrypi/linux/ Package: linux-image-6.12.75+rpt-rpi-2712 Priority: optional Section: kernel Installed-Size: 35930 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.12.75-1+rpt1 Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: apparmor Suggests: firmware-linux-free, linux-doc-6.12, debian-kernel-handbook Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Filename: pool/main/l/linux/linux-image-6.12.75+rpt-rpi-2712_6.12.75-1+rpt1_arm64.deb Size: 32723368 MD5sum: b959887468398db77e52466d11395d92 SHA1: 31c4422f71fa4d523c5694eff9ee276d3ddc5a60 SHA256: 4980f0626018b70499ab43fae5969e7c8662ac6938de987fc49755c34c2104d4 SHA512: a9397b323fed144d5f65b55d2337457be9652f9d8c45238133de80fdbca5e9f243b688aede5e885e0176eb4b05d55f9a8e015efa66c2e34fe1a63ba1bd9089e4 Description: Linux 6.12 for Raspberry Pi 2712, Raspberry Pi The Linux kernel 6.12 and modules for use on Raspberry Pi 2712 kernel. . This kernel includes the patches for Raspberry Pi platforms. Homepage: https://github.com/raspberrypi/linux/ Package: linux-image-6.12.75+rpt-rpi-v8 Priority: optional Section: kernel Installed-Size: 35939 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.12.75-1+rpt1 Depends: kmod, linux-base (>= 4.3~), initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool Recommends: apparmor Suggests: firmware-linux-free, linux-doc-6.12, debian-kernel-handbook Breaks: fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), wireless-regdb (<< 2019.06.03-1~) Filename: pool/main/l/linux/linux-image-6.12.75+rpt-rpi-v8_6.12.75-1+rpt1_arm64.deb Size: 32733368 MD5sum: f93cd2c0222d82d4e23511984a43d64e SHA1: 2e7e8ee7e01b6b6b473e1c6e0a147bf0b6edb11d SHA256: 93284cb9705b1953323a27a8a2b60d24ee3ace0d2142bddb286beea0ec751f31 SHA512: d6a625d886a59a3941cb7ae8a250a15a45151950634df200410fda3f59f600710f9968c4a741bf5058a1d058406075bbb86ae4577dece2d4f33195c5bc002acb Description: Linux 6.12 for Raspberry Pi v8, Raspberry Pi The Linux kernel 6.12 and modules for use on Raspberry Pi v8 kernel. . This kernel includes the patches for Raspberry Pi platforms. Homepage: https://github.com/raspberrypi/linux/ Package: linux-image-6.18.34+rpt-rpi-2712 Priority: optional Section: kernel Installed-Size: 35310 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool, kmod, linux-base-6.18.34+rpt-rpi-2712 (= 1:6.18.34-1+rpt1) Pre-Depends: linux-base (>= 4.12~) Recommends: apparmor Suggests: debian-kernel-handbook, firmware-linux-free, linux-doc-6.18 Breaks: flash-kernel (<< 3.110~), fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), reform-tools (<< 1.83~), u-boot-efi-dtb (<< 5~), wireless-regdb (<< 2019.06.03-1~) Filename: pool/main/l/linux/linux-image-6.18.34+rpt-rpi-2712_6.18.34-1+rpt1_arm64.deb Size: 31991448 MD5sum: fc65081fc948d9f316589acc45b63124 SHA1: 668b93c0abb60b2e0967ed4617ce57ad4bcd5849 SHA256: 80751778a78d18a5ba13912b17ad85b9e7b87adebf83c0239c56a92b38df3321 SHA512: 58f276c131525e97d80d3757ac426284a3aabb94625d1b56f476cbe1b9fb5eeb8095831598edbcd1d4d1fb5371e31381679a54a91e1bdc981f8c84c1b876dd27 Description: Linux 6.18.34 for Raspberry Pi 2712, Raspberry Pi The Linux kernel 6.18.34 and modules for use on Raspberry Pi 2712 kernel. . This kernel includes the patches for Raspberry Pi platforms. Homepage: https://github.com/raspberrypi/linux/ Package: linux-image-6.18.34+rpt-rpi-v8 Priority: optional Section: kernel Installed-Size: 35301 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: initramfs-tools (>= 0.120+deb8u2) | linux-initramfs-tool, kmod, linux-base-6.18.34+rpt-rpi-v8 (= 1:6.18.34-1+rpt1) Pre-Depends: linux-base (>= 4.12~) Recommends: apparmor Suggests: debian-kernel-handbook, firmware-linux-free, linux-doc-6.18 Breaks: flash-kernel (<< 3.110~), fwupdate (<< 12-7), initramfs-tools (<< 0.120+deb8u2), reform-tools (<< 1.83~), u-boot-efi-dtb (<< 5~), wireless-regdb (<< 2019.06.03-1~) Filename: pool/main/l/linux/linux-image-6.18.34+rpt-rpi-v8_6.18.34-1+rpt1_arm64.deb Size: 31980088 MD5sum: a239548244ff38b50ef15232be0bf000 SHA1: 67a14aa5262d17ac14f662646c16187342fad4a6 SHA256: 687315225328ff1a4cd2be43f0582c0b6c7c20c9b8900142c5d6b20393f21b1f SHA512: da0f3e2078a84cb464545ecfa26a50552553e44cd126d92326b686b998ed339ef4cdd11a95da70c1c09646454b4bece22a784fc46bf014ab0b3da44e3977f614 Description: Linux 6.18.34 for Raspberry Pi v8, Raspberry Pi The Linux kernel 6.18.34 and modules for use on Raspberry Pi v8 kernel. . This kernel includes the patches for Raspberry Pi platforms. Homepage: https://github.com/raspberrypi/linux/ Package: linux-image-rpi-2712 Priority: optional Section: kernel Installed-Size: 13 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Provides: linux-latest-modules-6.18.34+rpt-rpi-2712, wireguard-modules (= 1.0.0) Depends: linux-base-rpi-2712 (= 1:6.18.34-1+rpt1), linux-image-6.18.34+rpt-rpi-2712 (= 1:6.18.34-1+rpt1) Filename: pool/main/l/linux/linux-image-rpi-2712_6.18.34-1+rpt1_arm64.deb Size: 1436 MD5sum: 0dc758599a9b37c83ddbfaac87dc4080 SHA1: 59fe19daa98653b37168e6d2323d174cfdc34bfb SHA256: c465757abdf898d4bac8e01ca281c0cdcd717d14283b9ccc9b5299445b50d1b5 SHA512: 811342b67b655479df28f8fcc8dd9cb507c46207e0ac9f4ea390f508404fb06266a66f26dda761a001caee668df4fae87dc6e06ff9c05eb0af0c550c1aa6e0ce Description: Linux for Raspberry Pi 2712 (meta-package) This package depends on the latest Linux kernel and modules for use on Raspberry Pi 2712 kernel. Homepage: https://github.com/raspberrypi/linux/ Package: linux-image-rpi-v8 Priority: optional Section: kernel Installed-Size: 13 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Provides: linux-latest-modules-6.18.34+rpt-rpi-v8, wireguard-modules (= 1.0.0) Depends: linux-base-rpi-v8 (= 1:6.18.34-1+rpt1), linux-image-6.18.34+rpt-rpi-v8 (= 1:6.18.34-1+rpt1) Filename: pool/main/l/linux/linux-image-rpi-v8_6.18.34-1+rpt1_arm64.deb Size: 1440 MD5sum: 9ebb153b2fbcec55bf69e20d2a6fdce0 SHA1: acb0b2810efe314dd8b6a751d013d89e9246aba9 SHA256: a18e6d5f9f59ed1f7f18dae5e29cceea59c29479c250c3fa6cb893098697ab3a SHA512: 5242931976eb29378712702efcfd5a3716c3eb1fb4db508c7c29e31c365c92ec82d5fd58754c0850419d4d713064a820345049406a6242c36e9ed0636171e4f7 Description: Linux for Raspberry Pi v8 (meta-package) This package depends on the latest Linux kernel and modules for use on Raspberry Pi v8 kernel. Homepage: https://github.com/raspberrypi/linux/ Package: linux-kbuild-6.12.75+rpt Priority: optional Section: kernel Installed-Size: 3431 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.12.75-1+rpt1 Depends: libc6 (>= 2.38), libelf1t64 (>= 0.144), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.2.3.3), pahole Filename: pool/main/l/linux/linux-kbuild-6.12.75+rpt_6.12.75-1+rpt1_arm64.deb Size: 1380932 MD5sum: 7110bcbba9e4bd636d3fd8b9d7c22a7c SHA1: 3d174785ce40aca8be8f07d11429e4794403887b SHA256: c3bab95e96a0e791fe8bbb0aaff8090cf7c5d38ad97879451553dc5c770891f4 SHA512: 2c7301ce39b9a5c4045b906adb2788abcca7785b197cffc529d61f6d758b6a47bd1f19faecf9e6e322e4a1b240bf617e8722417539c239cc89f310fb21be0346 Description: Kbuild infrastructure for Linux 6.12.75+rpt This package provides the kbuild infrastructure for the headers packages for Linux kernel version 6.12. Homepage: https://github.com/raspberrypi/linux/ Multi-Arch: foreign Package: linux-kbuild-6.18.34+rpt Priority: optional Section: kernel Installed-Size: 3468 Maintainer: Serge Schneider Architecture: arm64 Source: linux Version: 1:6.18.34-1+rpt1 Depends: pahole, python3:any, libc6 (>= 2.38), libelf1t64 (>= 0.144), libssl3t64 (>= 3.0.0), zlib1g (>= 1:1.2.3.4) Filename: pool/main/l/linux/linux-kbuild-6.18.34+rpt_6.18.34-1+rpt1_arm64.deb Size: 1396336 MD5sum: 6cc4ef14bdb670f62fcf47c9111cdfd5 SHA1: 7320528513c0568eaec00fc74c34e89f6c4f68e9 SHA256: ac6fa7ccb424b04dbcfa97a8fdf21e138c443f9958616cf47106eb0f9145f4a7 SHA512: 1d82f05de33af3c58b9d6bd9da571acba90b6275f2e59b1a6df42c51d6acc1695c7eab5aa73da2e68ab20234142cbe23b3a7f3595f242c18175226a54ff27775 Description: Kbuild infrastructure for Linux 6.18.34+rpt This package provides the kbuild infrastructure for the headers packages for Linux kernel version 6.18. Homepage: https://github.com/raspberrypi/linux/ Multi-Arch: foreign Package: linux-libc-dev Priority: optional Section: devel Installed-Size: 8557 Maintainer: Serge Schneider Architecture: all Source: linux Version: 1:6.18.34-1+rpt1 Filename: pool/main/l/linux/linux-libc-dev_6.18.34-1+rpt1_all.deb Size: 2409800 MD5sum: 289cf0b2860f3347b7cb320ef9715637 SHA1: de1167abfbd591817ee366f8c10e87288aee1d74 SHA256: 0413f33611e3ecabcf0a90e694e139bf8b3ee8fec3abc4f39e09ceb27dcb53ca SHA512: fa3ecceb0f834705636c1d8a07b538c258b59bcaa92eb3ec40b9c01be75c31342a2ee43c8fb8397c9e02d155ee97afcfdc9ce7822f18fe604039a941d5c2f06e Description: Linux support headers for userspace development This package provides userspaces headers from the Linux kernel. These files are going to be installed into /usr/include, and are used by the installed headers for GNU libc and other system libraries. Homepage: https://github.com/raspberrypi/linux/ Multi-Arch: foreign Package: locales Priority: standard Section: localization Installed-Size: 15775 Maintainer: GNU Libc Maintainers Architecture: all Source: glibc Version: 2.41-12+rpt1+deb13u3 Depends: libc-bin (>> 2.41), libc-l10n (>> 2.41), debconf (>= 0.5) | debconf-2.0 Filename: pool/main/g/glibc/locales_2.41-12+rpt1+deb13u3_all.deb Size: 5108990 MD5sum: 8c078f16d457cd831893b78e99d96d34 SHA1: d12bb168ce4338cdaa811a74c26294db96243006 SHA256: e0e3464bdf4253a091819c75c4e8261726ad9f40a8a052cf215c51d0c4ead0b2 SHA512: 4e63616f25a2c63605dd4d685b330a6b32f97f611bff978f1793a3653d50e02bb47ca5c90b7d56abd25082686953f774997ab207b6b0ba0099884aae5c463126 Description: GNU C Library: National Language (locale) data [support] Machine-readable data files, shared objects and programs used by the C library for localization (l10n) and internationalization (i18n) support. . This package contains tools to generate locale definitions from source files (included in this package). It allows you to customize which definitions actually get generated. This is a space-saver over how this package used to be, with all locales generated by default. This created a package that unpacked to an excess of 30 megs. Homepage: https://www.gnu.org/software/libc/libc.html Package: mesa-libgallium Priority: optional Section: libs Installed-Size: 34303 Maintainer: Debian X Strike Force Architecture: arm64 Source: mesa Version: 25.0.7-2+rpt4 Provides: libglapi-mesa Depends: libc6 (>= 2.38), libdrm-amdgpu1 (>= 2.4.121), libdrm2 (>= 2.4.121), libelf1t64 (>= 0.142), libexpat1 (>= 2.0.1), libgcc-s1 (>= 3.0), libllvm19 (>= 1:19.1.0), libsensors5 (>= 1:3.5.0), libstdc++6 (>= 11), libx11-xcb1, libxcb-dri3-0 (>= 1.13), libxcb-present0, libxcb-randr0 (>= 1.3), libxcb-sync1, libxcb-xfixes0, libxcb1 (>= 1.9.2), libxshmfence1, libzstd1 (>= 1.5.5), zlib1g (>= 1:1.2.3.3) Filename: pool/main/m/mesa/mesa-libgallium_25.0.7-2+rpt4_arm64.deb Size: 11777772 MD5sum: cbbcefa2d15c1b442d088d6278378afe SHA1: 3c1a16af6bbeb50480979694e2b911f9f70b4e9b SHA256: 4981f1cd25e868a4849ec97aacd77203412fed6e38599f86bc8875641782d4fb SHA512: 49ffa9a09bf3c931db5ecad3a7b00e3e1eb7a38d43c914c8af77d74d232187b5792babadc2ac5ad16a1aface2174bacadda63235b42f6ef947ff9ab543644517 Description: shared infrastructure for Mesa drivers This package contains libgallium, a private library shared between multiple Mesa drivers. This library is an implementation detail of Mesa and should not be used directly by user code. Homepage: https://mesa3d.org/ Multi-Arch: same Package: netplan-generator Priority: optional Section: net Installed-Size: 332 Maintainer: Debian Networking Team Architecture: arm64 Source: netplan.io Version: 1.1.2-7+rpt1 Replaces: netplan.io (<< 0.106.1-8~) Depends: libc6 (>= 2.34), libglib2.0-0t64 (>= 2.70.0), libnetplan1 (= 1.1.2-7+rpt1), systemd (>= 248~) Suggests: network-manager | wpasupplicant, openvswitch-switch, iw Breaks: netplan.io (<< 0.106.1-8~) Filename: pool/main/n/netplan.io/netplan-generator_1.1.2-7+rpt1_arm64.deb Size: 74804 MD5sum: 3b3379376fdf0bac5e7d1841cc7af7be SHA1: cf803fc386e401a9728f48fb168ad38c3476672c SHA256: 222edf65ca379a8d6b40f18a81e4df1c5273846d9e56f1d0c9f37390c5128c8c SHA512: dc2c97b19f657313098c419322d7eae5c68888618f0917749c3d52152cf4a13b11289f9ee21f195c1b7437736a5e0cc865efdf49272e958e7fec459ebb8a6fdd Description: Declarative network configuration for various backends at boot Netplan reads YAML network configuration files which are written by administrators, installers, cloud image instantiations, or other OS deployments. During early boot it then generates backend specific configuration files in /run to hand off control of devices to a particular networking daemon. . Currently supported backends are networkd and NetworkManager. . This package provides a systemd-generator to configure various networking daemons at boot time. Homepage: https://netplan.io/ Multi-Arch: foreign Package: netplan.io Priority: optional Section: net Installed-Size: 372 Maintainer: Debian Networking Team Architecture: arm64 Version: 1.1.2-7+rpt1 Depends: python3:any, libc6 (>= 2.34), libglib2.0-0t64 (>= 2.70.0), libnetplan1 (= 1.1.2-7+rpt1), libsystemd0 (>= 243), ethtool, iproute2, netplan-generator, python3-netplan, python3-yaml, systemd (>= 248~), udev Recommends: python3-rich Suggests: systemd-resolved Filename: pool/main/n/netplan.io/netplan.io_1.1.2-7+rpt1_arm64.deb Size: 82080 MD5sum: 0b60f5a6765109ab40fceff2ea14011c SHA1: 71def78c45a5f3eab4d85ad123f28d0c3e7563fc SHA256: 1297a39ce7301fadf956c52362e34d8ea3aca1825b4ae4dc41577c270933f6cf SHA512: f075ad7ba3ff2be792d34ac77475af059d02fa2700392552599fc6b6fc68db6bfe145d9808e640083e73773633fb49c43b621bb141829421d7dfe05485b23181 Description: Declarative network configuration for various backends at runtime Netplan reads YAML network configuration files which are written by administrators, installers, cloud image instantiations, or other OS deployments. During early boot it then generates backend specific configuration files in /run to hand off control of devices to a particular networking daemon. . Currently supported backends are networkd and NetworkManager. . This package provides a runtime CLI to control the Netplan backends, e.g. to re-generate configuration or apply changes. Homepage: https://netplan.io/ Multi-Arch: foreign Package: network-manager Priority: optional Section: net Installed-Size: 8584 Maintainer: Utopia Maintenance Team Architecture: arm64 Version: 1.52.1-1+rpt4 Depends: libaudit1 (>= 1:2.2.1), libbluetooth3 (>= 5), libc6 (>= 2.38), libcurl3t64-gnutls (>= 7.24.0), libglib2.0-0t64 (>= 2.68.0), libgnutls30t64 (>= 3.7.2), libjansson4 (>= 2.14), libmm-glib0 (>= 1.10.0), libndp0 (>= 1.2), libnetplan1 (>= 0.106), libnewt0.52 (>= 0.52.25), libnm0 (= 1.52.1-1+rpt4), libpsl5t64 (>= 0.13.0), libreadline8t64 (>= 6.0), libselinux1 (>= 3.1~), libsystemd0 (>= 209), libteamdctl0 (>= 1.9), libudev1 (>= 183), netplan.io (>= 0.106~), default-dbus-system-bus | dbus-system-bus, adduser Recommends: ppp, dnsmasq-base, modemmanager, wireless-regdb, wpasupplicant, libpam-systemd, polkitd, udev, network-manager-l10n Suggests: libteam-utils, iptables Breaks: ppp (>= 2.5.2-2~), ppp (<< 2.5.2-1+~) Filename: pool/main/n/network-manager/network-manager_1.52.1-1+rpt4_arm64.deb Size: 2053348 MD5sum: 2fd2157739ae716913f4c0852d59432b SHA1: 23f1dcaee37234da3fea8ae829c1d17bc6aa16e3 SHA256: 50717dccae05dcc6e091d4f9a57503a969836cbeaa5f87afd54bbbe9beb6e801 SHA512: 03994c84785b44d04d1d032ff4d122e2e3b54fcf69851db99b2f07d8271b101768d001c20257f304e51414ba81675f5a5b8de4b55fbefcb11ee7245fe8a5d129 Description: network management framework (daemon and userspace tools) NetworkManager is a system network service that manages your network devices and connections, attempting to keep active network connectivity when available. It manages ethernet, Wi-Fi, mobile broadband (WWAN), and PPPoE devices, and provides VPN integration with a variety of different VPN services. . This package provides the userspace daemons and a command line interface to interact with NetworkManager. . Optional dependencies: * ppp: Required for establishing dial-up connections (e.g. via GSM). * dnsmasq-base/iptables: Required for creating Ad-hoc connections and connection sharing. * libteam-utils: Network Team driver allows multiple network interfaces to be teamed together and act like a single one. This process is called "ethernet bonding", "channel teaming" or "link aggregation". Homepage: https://networkmanager.dev/ Package: network-manager-l10n Priority: optional Section: localization Installed-Size: 8525 Maintainer: Utopia Maintenance Team Architecture: all Source: network-manager Version: 1.52.1-1+rpt4 Replaces: network-manager (<< 1.52.0-3~) Breaks: network-manager (<< 1.52.0-3~) Filename: pool/main/n/network-manager/network-manager-l10n_1.52.1-1+rpt4_all.deb Size: 1207396 MD5sum: ad710fe58769cb2310ed6534f6f4727b SHA1: 7388a9bd2587800389a34c59f98d05ca0d86e997 SHA256: ad589008404ca8233719d0719b3c7bd891a76946498ae328ed612532b9f0ab0a SHA512: 66a4c925d9732fa8386437dfb64dba0607b49c334b0b53590cb195c7fbd945b7e1de08d51dde1c5fd5a8f2b4d9e100b285247018e777947815012cc9bda35bd3 Description: network management framework (translation files) This package provides translations for messages of the programs found in the network-manager package. Homepage: https://networkmanager.dev/ Multi-Arch: foreign Package: openssl Priority: optional Section: utils Installed-Size: 2551 Maintainer: Debian OpenSSL Team Architecture: arm64 Version: 3.5.6-1~deb13u2+rpt1 Depends: libc6 (>= 2.34), libssl3t64 (>= 3.5.0) Suggests: ca-certificates Filename: pool/main/o/openssl/openssl_3.5.6-1~deb13u2+rpt1_arm64.deb Size: 1566302 MD5sum: 6e18c4af1489d1a0e9dd92a0131e6033 SHA1: 050aa7c1debe251a9752048c8551a6253bfd6b33 SHA256: a9fcaa03673f7d9912071d9bf5be9a547cd938dede469e17cbc59eaacead0d03 SHA512: 9b4a91d4387d2cc75f5a96b7e8df015ca33510d3bbd9a03b4d2ecf36f781973f58ef3b48eb4deb7b5b4f0d1fc42f6fbe019615fc8fed193e254e96fcdf3f97e5 Description: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains the general-purpose command line binary /usr/bin/openssl, useful for cryptographic operations such as: * creating RSA, DH, and DSA key parameters; * creating X.509 certificates, CSRs, and CRLs; * calculating message digests; * encrypting and decrypting with ciphers; * testing SSL/TLS clients and servers; * handling S/MIME signed or encrypted mail. Homepage: https://openssl-library.org Multi-Arch: foreign Package: openssl-provider-legacy Priority: optional Section: utils Installed-Size: 413 Maintainer: Debian OpenSSL Team Architecture: arm64 Source: openssl Version: 3.5.6-1~deb13u2+rpt1 Replaces: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5) Depends: libc6 (>= 2.17), libssl3t64 (>= 3.0.3) Breaks: libssl3 (<< 3.3.1-5), libssl3t64 (<< 3.3.1-5) Filename: pool/main/o/openssl/openssl-provider-legacy_3.5.6-1~deb13u2+rpt1_arm64.deb Size: 321274 MD5sum: 32617d76d0388fbe236963b3c29f178a SHA1: e90f395ea115e2ea31a1499baaa0f98f9b28d644 SHA256: 26ba48660a149785a17a915e688597b0d875d3b9b249d90854b3129b8c6a18af SHA512: 2a1e1408bddfc9c308e03b8fb8cfbeea62bda4242ee296b4a016638d1a1d5e0ce3d549cbf540849d003b44426f0a49b96f85628c74665912ff8ed82ee80a3f13 Description: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . This package contains the legacy provider. The OpenSSL legacy provider supplies OpenSSL implementations of algorithms that have been deemed legacy. Such algorithms have commonly fallen out of use, have been deemed insecure by the cryptography community, or something similar. For details see OSSL_PROVIDER-legacy man page. Homepage: https://openssl-library.org Multi-Arch: foreign Package: pastebinit Priority: optional Section: misc Installed-Size: 333 Maintainer: Thomas Ward Architecture: all Version: 1.7.1-1+~rpt2 Depends: python3:any, python3-distro Filename: pool/main/p/pastebinit/pastebinit_1.7.1-1+~rpt2_all.deb Size: 53958 MD5sum: a211b3772d7920dd43c6b2f124b5343d SHA1: a9083e614a81f30671df90a4d8e0f3b45cfd59fb SHA256: a5ee4aedbf2837768eb85db6635e75171337ed3780a636f9909bc6f4136f04b7 SHA512: d507e1bf43bfd1d06bd7f10b079c971dd85c606e730e2ce5aadb5ef5d6c001d96bceb98d187e58a5778c66f0fa40203cb65acd83058e56eab41ef9cadd15758c Description: command-line pastebin client pastebinit is a command-line tool to send data to a "pastebin", a web site which allows its users to upload snippets of text for public viewing. Homepage: https://github.com/pastebinit/pastebinit Package: python3-gpiozero Priority: optional Section: python Installed-Size: 680 Maintainer: Serge Schneider Architecture: all Source: gpiozero Version: 2.0.1-0+rpt1+trixie Depends: python3-colorzero, python3-importlib-metadata | python3-supported-min (>= 3.10), python3-importlib-resources | python3-supported-min (>= 3.10), python3:any Recommends: python3-lgpio, python3-spidev Suggests: python-gpiozero-doc Filename: pool/main/g/gpiozero/python3-gpiozero_2.0.1-0+rpt1+trixie_all.deb Size: 154318 MD5sum: 0ac8736faa5282b86284635ccc0eb026 SHA1: 76b7fd1caabab6c99ca2ca9fadc9a288978aef71 SHA256: 4f8e5f686aae3a67dbdf14e3a23fa4eaf987679061c9465f73a03f8f360c1427 SHA512: 6112f1bf29cb351b93c08ac8aafcfe4f4cbb23c7f9993b7b24141ce9b570da43bf95f1aebdcae8b3521864fe9c876b181fc0e96cfd0e235df3b45c5ed20424a2 Description: Simple API for controlling devices attached to a Pi's GPIO pins gpiozero builds on various pin libraries to provide a set of classes designed to simplify interaction with devices connected to the GPIO pins, from simple buttons and LEDs, up to various add-on boards. The API tries to adhere closely to Python's idioms and naming conventions, and features alternative programming paradigm approaches. . This is the Python 3 version of the package. Homepage: http://gpiozero.readthedocs.io/ Package: python3-lgpio Priority: optional Section: python Installed-Size: 324 Maintainer: Serge Schneider Architecture: arm64 Source: lg-gpio Version: 0.2.2-1~rpt1+trixie Depends: liblgpio1 (= 0.2.2-1~rpt1+trixie), python3 (<< 3.14), python3 (>= 3.13~), python3:any, libc6 (>= 2.17) Filename: pool/main/l/lg-gpio/python3-lgpio_0.2.2-1~rpt1+trixie_arm64.deb Size: 69578 MD5sum: 5d2ebab38b2294eed3b28fc3d9fa60f4 SHA1: 73b73e0298ba5c624caf2ce0490b14f284d1416d SHA256: 2df8ae455cc40d4b4b50d38ffe2b6438fa2e9d58419a3060ee5afe0e430012cc SHA512: dffd95d7de88f14cfacd5de2ce04bc7de19c0c5daef819b95c7cce1f4824fbcea258473a32e6abedb685f8cad5053a6e9b17bb79fcf9124a0dc3e38422fcf1be Description: Control GPIO pins via gpiochip devices - python3 bindings The lgpio library is a fully featured library for controlling the GPIO pins of the local board. It includes facilities for software PWM, callbacks on level change, I2C, SPI, and UART wrappers. . This package contains the Python 3 bindings for liblgpio. Homepage: https://abyz.me.uk/lg Package: python3-netplan Priority: optional Section: python Installed-Size: 193 Maintainer: Debian Networking Team Architecture: arm64 Source: netplan.io Version: 1.1.2-7+rpt1 Replaces: netplan.io (<< 0.107-3~) Depends: python3 (>= 3~), python3:any, libc6 (>= 2.17), libnetplan1 (= 1.1.2-7+rpt1), python3-cffi-backend Breaks: netplan.io (<< 0.107-3~) Filename: pool/main/n/netplan.io/python3-netplan_1.1.2-7+rpt1_arm64.deb Size: 36372 MD5sum: 476a4855f0a9d468ecafb55ae6651472 SHA1: 4c55ea2ad3846af729eba4a49493eddab5cb5e2d SHA256: a934df7db5ad14cde1f12dd5401133532d408235fcb262b39364454460d5b7e7 SHA512: c11600c2eb2e731aa17fd7868f4fc9d144315172032617ce45fefbb5c798ef12a3c6ce22c50184329731bd4f21a476f40ce8c3c95a1c804146c318bca5dda553 Description: Declarative network configuration Python bindings Netplan reads YAML network configuration files which are written by administrators, installers, cloud image instantiations, or other OS deployments. During early boot it then generates backend specific configuration files in /run to hand off control of devices to a particular networking daemon. . Currently supported backends are networkd and NetworkManager. . This package provides a CFFI based Python bindings to libnetplan. Homepage: https://netplan.io/ Multi-Arch: foreign Package: python3-pip-whl Priority: optional Section: python Installed-Size: 1534 Maintainer: Debian Python Team Architecture: all Source: python-pip Version: 25.1.1+dfsg-1+rpt1 Replaces: python-pip-whl (<< 21.3.1+dfsg-2~) Depends: ca-certificates Breaks: python-pip-whl (<< 21.3.1+dfsg-2~) Filename: pool/main/p/python-pip/python3-pip-whl_25.1.1+dfsg-1+rpt1_all.deb Size: 1505448 MD5sum: 17710a178589786cd67328d574febb92 SHA1: 8c7c341f0a41f0037951ce30db2806ab4baf5bf3 SHA256: c778301fa1a60cabcfbf6a2669994aae57329802b4ca4acb1d0908c98daa42ec SHA512: 7bf4f8cac4b8b324fd2f7428574a392f02ebc39bf6be2bffe1d6cbc290f51a4533a1c687a29c67a13045266bc3248068fc94bcd6a41244aca79bdfc2c26d7287 Description: Python package installer (pip wheel) pip is the Python package installer. It integrates with virtualenv, doesn't do partial installs, can save package state for replaying, can install from non-egg sources, and can install from version control repositories. . This is the support package for the PEP 427 wheel version of the package, required for using pip inside a virtual environment. Homepage: https://pip.pypa.io/en/stable/ Multi-Arch: foreign Package: python3-rpi-lgpio Priority: optional Section: python Installed-Size: 58 Maintainer: Serge Schneider Architecture: all Source: rpi-lgpio Version: 0.6-0~rpt1+trixie Provides: python3-rpi.gpio Depends: python3-lgpio, python3:any Conflicts: python3-rpi.gpio Filename: pool/main/r/rpi-lgpio/python3-rpi-lgpio_0.6-0~rpt1+trixie_all.deb Size: 14450 MD5sum: 3b25472818282cbb1b408abf4927ddc6 SHA1: ce968f817d5e009d9b198111a9fb5a5da4fb13be SHA256: 01f0a6be9aa37be66172ec2f94cdf0d6998352a8d3c1e7ef14cfe001f3cf2e36 SHA512: 939d34a5015f49e84793deca824eacb2e077917ff2ca138f2c31a73790089da76950e95138be23b552969c62a0eaee67b0e93c80b1d472d5704e306dbdd28a09 Description: Compatibility shim for lgpio emulating the RPi.GPIO API The rpi-lgpio library provides an RPi.GPIO compatible interface to the lgpio library, which operates GPIO via the Linux kernel's gpiochip devices. . This is the Python 3 version of the API. Homepage: https://github.com/waveform80/rpi-lgpio Package: raspberrypi-archive-keyring Priority: important Section: misc Installed-Size: 28 Maintainer: Serge Schneider Architecture: all Version: 2025.1+rpt1 Filename: pool/main/r/raspberrypi-archive-keyring/raspberrypi-archive-keyring_2025.1+rpt1_all.deb Size: 7372 MD5sum: ec2cdc9f39582c3727d0b196f6761dea SHA1: 9a2f5e2c68f0e4fa6de6372f427eb2b7edd70f7f SHA256: 2e727149d7acb8cc7f604e66d0049161039c8aa1eaf1175e54f9e69d963d60e4 SHA512: 5bf56937705683bb86cba3ad93a33e8738e08144fc75f6dd55763b58750cf0f714e55295bdb6957e4c169f438020b99f3427fe06eb5f3bb27698c0ed1253d686 Description: OpenPGP archive certificates of the Debian archive The Debian project digitally signs its Release files. This package contains the archive certificates used for that. Multi-Arch: foreign Package: raspberrypi-net-mods Priority: optional Section: net Installed-Size: 16 Maintainer: Serge Schneider Architecture: all Version: 1.4.4 Depends: network-manager, raspi-config (>= 20220804) Filename: pool/main/r/raspberrypi-net-mods/raspberrypi-net-mods_1.4.4_all.deb Size: 2518 MD5sum: db7a5cd93bc2d4bff743a5ee81260fad SHA1: 3b9941574ff6acf384a0381627f2e72464050d61 SHA256: ce5a5ab98f78930e16b360e17a160bd3d3a9299c71c1eb738c999a12b709e54d SHA512: 6a37ea3d47422d51b1595c16e9fb7fcdc0ce9a5a629b67e6cca2a84df7bf03c7a59827862a12347c449b9c2905d0d2971a41ad8575e43a138bb3fc3f257454c5 Description: Network configuration for the Raspberry Pi UI Package: raspberrypi-sys-mods Priority: optional Section: admin Installed-Size: 112 Maintainer: Serge Schneider Architecture: arm64 Version: 1:20260612 Replaces: raspberrypi-ui-mods (<< 1.20210706) Depends: systemd (>= 230), gettext-base, raspi-config (>= 20220809), parted, fdisk, whiptail, uuid Recommends: rfkill, rpi-eeprom, ssh-import-id, userconf-pi Breaks: raspberrypi-ui-mods (<< 1.20210706) Filename: pool/main/r/raspberrypi-sys-mods/raspberrypi-sys-mods_20260612_arm64.deb Size: 20004 MD5sum: fbc994ab228d6c71f34c7ba0d9fadfa1 SHA1: c8b234fb8acd97307bca5888e8be6d79ab7d401c SHA256: d6ec49c7a71f0b1d19da576216e72c683ad38d85a55c690684fd6e3b05bda578 SHA512: 5edb94dfc5e6ad628069b5efa6137770032ea85375e50b91e5943fd3245fd938a69016ab923c7c77fba8c8859229e2820899060aa2ef0b5aa263acddafac84a8 Description: System tweaks for the Raspberry Pi Various modifications to improve the performance or user experience. Homepage: https://github.com/RPi-Distro/raspberrypi-sys-mods Package: raspi-config Priority: optional Section: utils Installed-Size: 32 Maintainer: Serge Schneider Architecture: all Version: 20260522 Depends: raspi-config-core, whiptail, parted, alsa-utils, psmisc, raspi-utils-core, dconf-cli, bsdextrautils Recommends: iw Filename: pool/main/r/raspi-config/raspi-config_20260522_all.deb Size: 12618 MD5sum: 84a615cc42e4ee593cd40fb0b8805f8b SHA1: e3abbba82e75eccf3f9d930d1df1782b394210bc SHA256: 6f916eb9d065fc29727e4982fc99f758fdc97b3db0f815e01f1727e3fdff3bcd SHA512: 54e124fca1053afe8e2b8cffa7b50f1ef07aa01052a6ab8d472f0ed477b4beb5af0c6275b4cc0e586157c6b524fc6971f10b62e56e2e1204252ac87f690a5672 Description: Raspberry Pi configuration tool A simple configuration tool for common Raspberry Pi administrative tasks Package: raspi-config-core Priority: optional Section: utils Installed-Size: 146 Maintainer: Serge Schneider Architecture: all Source: raspi-config Version: 20260522 Replaces: raspi-config (<< 20251202) Breaks: raspi-config (<< 20251202) Filename: pool/main/r/raspi-config/raspi-config-core_20260522_all.deb Size: 35946 MD5sum: 5ba5c38b38eaf83fcd797a70aaa0fd2d SHA1: 25601c2696ffe18c3d6fab431fa184a5b20fda1d SHA256: b2a5f7f47f78b39e61f452fe5f1ac49bd2f0fa15186ef5036d658764680d079b SHA512: b03ebab2b91195b5ecd07af84e9f9d83b091645b02699110c5bbccc76074d131a7c31c0c3acc274f1d7960997327bd812ff630e0d4811c3552da9992b6d44523 Description: Raspberry Pi configuration tool (script only) A simple configuration tool for common Raspberry Pi administrative tasks . This package contains just the raspi-config script, intended for advanced, non-interactive use. This package does not install any of the depenencies. Package: raspi-firmware Priority: optional Section: non-free-firmware/misc Installed-Size: 22191 Maintainer: Serge Schneider Architecture: all Version: 1:1.20260521-3 Replaces: linux-firmware-raspi3 (<< 1.20161123-2), raspi3-firmware (<< 1.20190718-1~) Depends: dosfstools, rsync Pre-Depends: dpkg (>= 1.17.14) Suggests: firmware-brcm80211, firmware-misc-nonfree, bluez-firmware Breaks: linux-firmware-raspi3 (<< 1.20161123-2), raspi3-firmware (<< 1.20190718-1~) Filename: pool/main/r/raspi-firmware/raspi-firmware_1.20260521-3_all.deb Size: 13054676 MD5sum: ec643af8f3e005c737f53fba20762d3f SHA1: 1855c98acd0c965fd1f75ed9b05482145bf13070 SHA256: d8008fb9891ed962a15861d41448e94dc0092648e4928db2772257835fb8e825 SHA512: 0bb3a212928b993d376c768c025788ff4eecbb44d1eab842fa4adde9e3902ad3e3b3829c59c7711f4feb59c38838fcb2f8f085d85719f65cf0b50cf9e8e59ed1 Description: Raspberry Pi family GPU firmware and bootloaders This package contains all the proprietary files necessary to boot a Raspberry Pi board. . Raspberry Pi is a trademark of the Raspberry Pi Foundation. Homepage: https://github.com/raspberrypi/firmware Package: raspi-utils Priority: optional Section: utils Installed-Size: 14 Maintainer: Serge Schneider Architecture: all Version: 20260601-1 Depends: raspi-utils-core, raspi-utils-otp, raspi-utils-dt, raspi-utils-eeprom, raspinfo (>= 20240402-4) Filename: pool/main/r/raspi-utils/raspi-utils_20260601-1_all.deb Size: 7608 MD5sum: c14dec7dfb9cbd2d061a33ab9cbe91fb SHA1: c4e05f53b0f1218880f548d395ec6a1730870f45 SHA256: aa9574cb96f668977e10cc3d7b6fa60210b96053db72135f379698c4d5d090ad SHA512: f6175cf691cbf6abc3d750ce132508e53853f0c71b431d4d2143836d7286911a2fc489f97ed146a6abcebeb44afce81d0243dbbe27bc767d5a3de00fd68b31cd Description: Collection of scripts and simple applications This is a meta-package that installs all of utilities Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-core Priority: optional Section: utils Installed-Size: 307 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20260601-1 Replaces: libraspberrypi-bin, raspi-utils (<< 20240402-4) Depends: libc6 (>= 2.38), libgpiolib0 (>= 20250514) Breaks: libraspberrypi-bin, raspi-utils (<< 20240402-4) Filename: pool/main/r/raspi-utils/raspi-utils-core_20260601-1_arm64.deb Size: 41198 MD5sum: 3dfe5045a1392e7934276e9c167f70a3 SHA1: e49b117a3a5d394d37899ff164531eef7a0befb4 SHA256: 19f6b18809c308cd228feb4ae87049a097297d8cdc73666208e7fc7bf8bf18bf SHA512: 11372144e843c6547a99619d5a1e97d9841f5f30b92cf74dc253ef8976eb83d11e21b51025ae7c33492f25829453b78ba66275b69ccdffed8c384ec55bb12af8 Description: Collection of scripts and simple applications vclog - A tool to get VideoCore 'assert' or 'msg' logs with optional -f to wait for new logs to arrive pinctrl - A tool for displaying and modifying the GPIO and pin muxing state of a system, bypassing the kernel. vcgencmd - A tool to get various bits of information from the VideoCore vcmailbox - A tool to send a message to the VideoCore Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-dt Priority: optional Section: utils Installed-Size: 241 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20260601-1 Replaces: libraspberrypi-bin, ovmerge (<< 20230123-1), raspi-utils (<< 20240402-4) Depends: perl:any, libc6 (>= 2.34), libdtovl0 (>= 20250514), libfdt1 (>= 1.7.2), device-tree-compiler Breaks: libraspberrypi-bin, ovmerge (<< 20230123-1), raspi-utils (<< 20240402-4) Filename: pool/main/r/raspi-utils/raspi-utils-dt_20260601-1_arm64.deb Size: 54590 MD5sum: 36c816b27c2cab4b812abe4d4ce9b1a7 SHA1: b34e87d66a9156838eb966b53182f628fbbce972 SHA256: 7f1049bac3c9d8c5d63bf950927882da7c1f71a125be694801bf71259762d07b SHA512: 9e2616c2b8f1c651bceff8d83acaae208fd76bfc6b701dc2176a771788516d5b214eaca7174035c883757392c86a3c2068ceefa7d8c2e72d443271697a06f961 Description: Device Tree overlay utilities dtmerge - A tool for applying compiled DT overlays (*.dtbo) to base Device Tree files (*.dtb) overlaycheck - A tool for validating the overlay files and README in a kernel source tree ovmerge - A tool for merging DT overlay source files (*-overlay.dts), flattening and sorting .dts files for easy comparison, displaying the include tree, etc Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-eeprom Priority: optional Section: utils Installed-Size: 154 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20260601-1 Replaces: raspi-utils (<< 20240402-4) Depends: libc6 (>= 2.34) Breaks: raspi-utils (<< 20240402-4) Filename: pool/main/r/raspi-utils/raspi-utils-eeprom_20260601-1_arm64.deb Size: 27372 MD5sum: 9be2399cd9b5eb15bfc18afff01c0804 SHA1: 1a5926164b6e86c433cf9c1d5c743614655e6dbc SHA256: 7867ab55cd15359fd5c30a89ab1a3ac775af282aa92beccaf95cf87b2d053dd9 SHA512: c158054e0867e919cf972ef0f2df2123f788e183e1358b9523e3c111f7f2e697bf839a8103889b9e4e9b6d7533aa1bb65bca00ef93819f3fcd87a3b3af3ddd92 Description: Tools for creating and managing EEPROMs for HAT+ and HAT board Tools for building, flashing and reading Raspberry Pi HAT+ and HAT .eep files Homepage: https://github.com/raspberrypi/utils Package: raspi-utils-otp Priority: optional Section: utils Installed-Size: 21 Maintainer: Serge Schneider Architecture: all Source: raspi-utils Version: 20260601-1 Replaces: raspi-utils (<< 20240402-4) Depends: python3:any Breaks: raspi-utils (<< 20240402-4) Filename: pool/main/r/raspi-utils/raspi-utils-otp_20260601-1_all.deb Size: 10120 MD5sum: 8e0c058da196371f1f1ebb34b68943cc SHA1: 1ed4498a9ace2ebdef490f2eaf60db9771876a28 SHA256: 32d27d7e7f4e53a18eab63154bc3c9e0de060ca7d6ae84815b9e7347ac6c164c SHA512: 453fb710c7175b0932b445e9e888afe60ac9d14d80f96e6f0fb9243efa056d1ac777e567b601ff21d2e05d2ed682555e58b57bf6545220de23dd04293cacfc0b Description: Tools for reading and setting Raspberry Pi OTP bits A short script to help with reading and setting the customer OTP bits Homepage: https://github.com/raspberrypi/utils Package: raspinfo Priority: optional Section: utils Installed-Size: 23 Maintainer: Serge Schneider Architecture: all Source: raspi-utils Version: 20260601-1 Replaces: raspi-utils (<< 20240402-4) Depends: raspi-utils-core, net-tools, kms++-utils, rpi-eeprom, sudo, usbutils Recommends: pastebinit Breaks: raspi-utils (<< 20240402-4) Filename: pool/main/r/raspi-utils/raspinfo_20260601-1_all.deb Size: 10360 MD5sum: 231b3ea8befc3cf392a2deb09d3d0618 SHA1: b74a9f59f5f50e9a04046ec89fe1d7c43b11207e SHA256: 7ce5b2f9b50dcab38187a3b06d30e47049e8ab68baf74f0cc608d009fad9a3eb SHA512: 7cdfdb5b28535b6e9d53704b8e86d89dca52f9de597630b6ee073af4a890ff337944a9880fe9b323a2a23368434efbe8e734d06488973281dd45e39dd7a8a0fc Description: Prints information about the Raspberry Pi for bug reports A short script to dump information about the Pi. Intended for the submission of bug reports Homepage: https://github.com/raspberrypi/utils Package: rpi-cloud-init-mods Priority: optional Section: admin Installed-Size: 22 Maintainer: Tom Dewey Architecture: all Version: 1:20260119 Depends: cloud-init, netplan.io (>= 1.1.2-7) Filename: pool/main/r/rpi-cloud-init-mods/rpi-cloud-init-mods_20260119_all.deb Size: 3504 MD5sum: 16e74128b0eafafac76623779ccf0b18 SHA1: d5f6abae4f3b08843e345f059b7f89233c5bd749 SHA256: 8d886cefa7b62b6628c00449ecbc770a567bb53bca113053104e3ff7632c09f8 SHA512: 53b734fd38dfeeb9c8e8255e00fe66318671de258192e25be8dfe72a90c8aacc2d77a58182d8bcc67a9495ac65baf7afd278d6c536621408556c3ec63ebebee5 Description: Cloud-Init and netplan configuration for Raspberry Pi OS This package provides vendor defaults for cloud-init and netplan used by Raspberry Pi OS images. It allows updating these configurations via APT without rebuilding the base image and makes it easy to remove them by uninstalling the package. . Installed files: * /usr/lib/netplan/00-network-manager-all.yaml - sets NetworkManager as the netplan renderer. * /etc/cloud/cloud.cfg.d/99-raspberrypi.cfg - Raspberry Pi–specific cloud-init configuration * /usr/lib/systemd/system/cloud-init-main.service.d/40-rpi-journal.conf - Override StandardOutput logging to just the journal * /usr/lib/systemd/system/cloud-init-main.service.d/41-rpi-firmware-mount.conf - Add dependency on boot-firmware.mount Homepage: https://github.com/RPi-Distro/rpi-cloud-init-mods Package: rpi-connect-lite Priority: optional Section: admin Installed-Size: 21273 Maintainer: Raspberry Pi Connect Team Architecture: arm64 Version: 2.12.0 Replaces: rpi-connect Depends: init-system-helpers (>= 1.52), dbus-user-session Suggests: rpifwcrypto Conflicts: rpi-connect Filename: pool/main/r/rpi-connect-lite/rpi-connect-lite_2.12.0_arm64.deb Size: 8452762 MD5sum: 37a4541005556d58820d3ec7e0b25a09 SHA1: 2392a8ea0ad392e22e0433b452d53e0fa84afea5 SHA256: 6b16bf0369133fb9867da8206073aa073db27de691ad8d12b5266f852c725ee6 SHA512: 7f895b97d22fdf57e2746094db9a6a73dc7cd7e31e694ec65fa00c25eb14b53de3dc1a182b24683967fed9f29703555fc12f2b53b2d30defb9f5c99a9bb5bea4 Description: Raspberry Pi Connect - Access your Raspberry Pi from anywhere Raspberry Pi Connect gives you free, simple, out-of-the-box access to your Raspberry Pi from anywhere in the world. . It is a secure remote access solution for Raspberry Pi OS, allowing you to connect to your Raspberry Pi command line directly from any browser. . This version excludes screen sharing functionality that requires a Wayland compositor. Homepage: https://www.raspberrypi.com/software/connect/ Package: rpi-eeprom Priority: optional Section: misc Installed-Size: 6014 Maintainer: Tim Gover Architecture: all Version: 28.27-1 Replaces: rpi-eeprom-images (<< 7.2) Provides: rpi-eeprom-images Depends: raspi-utils, python3, binutils, pciutils, python3-pycryptodome Recommends: flashrom, rpieepromab (>= 20260304+1) Breaks: rpi-eeprom-images (<< 7.2) Filename: pool/main/r/rpi-eeprom/rpi-eeprom_28.27-1_all.deb Size: 853520 MD5sum: 8e396b56360240822d6259d883ae26ea SHA1: a34b81a76cdd09397237ef94e3de2c97860421cd SHA256: 461a8bf018f8618e50a2414b9251bc15e09558c2698ba05d1f0321ec6f0fe40b SHA512: 0febca2da95a6af35bc71398e23a0c17c30af5f6b455bc4d549bb04625afc8eb47d36cb312d03ae2e6672248d08c5b9d9e87ce185ab07ce47bd8c64338ed1f01 Description: Raspberry Pi 4/5 boot EEPROM updater Checks whether the Raspberry Pi bootloader EEPROM is up-to-date and updates the EEPROM. Homepage: https://github.com/raspberrypi/rpi-eeprom/ Package: rpi-keyboard-config Priority: optional Section: misc Installed-Size: 188 Maintainer: Mathew Blowers Architecture: all Version: 1.0 Depends: python3:any (>= 3.8~), libhidapi-hidraw0 Filename: pool/main/r/rpi-keyboard-config/rpi-keyboard-config_1.0_all.deb Size: 31524 MD5sum: 42ce01d95bc36b4c66b80adab70c573e SHA1: 977ffa5c5bfdca3e83b411c10a73831534702f97 SHA256: 57fa3c6e433f962b5ce7ad1b4b966b4158217b4365c1be12003edd31b8952170 SHA512: 28d7389e9b3012b163dc15de7111252641779acf5a4f354dd8555355d4cce917405d44476af48baa63633d626f14fb147e7ef615a8f4591eb735ec62b207a1c1 Description: RPi Keyboard Config This package provides a command line interface and python library for configuring RPi Keyboards. It allows you to change the keyboard's keymaps and control the RGB leds on supported keyboards. Package: rpi-keyboard-fw-update Priority: optional Section: misc Installed-Size: 1001 Maintainer: Andrew Scheller Architecture: all Version: 1.0.1 Depends: usbutils, raspi-utils-core, mount, udev Filename: pool/main/r/rpi-keyboard-fw-update/rpi-keyboard-fw-update_1.0.1_all.deb Size: 285852 MD5sum: 47204dfe6451db8b3848945d17a4fa46 SHA1: 668976a7a0179eb7bc0b6b5b30d4ce253a490832 SHA256: 1e0e403e9d9898bce9c8be025df9e363538284e375dfc100532c13a58c22ea84 SHA512: 7dd0d33f26cbbf174b37e95b66d369caa3ce759a74b1b906ac1bad0bafb4fcdf90adb9c1f40307f8daaa80ba54777867956d4d917ad25afa7e0c424f9b4f4ca6 Description: Keyboard firmware updater A tool to update the keyboard firmware in the Raspberry Pi 500 or 500+. Package: rpi-loop-utils Priority: optional Section: embedded Installed-Size: 29 Maintainer: Richard Oliver Architecture: all Source: rpi-swap Version: 1.2.2 Depends: systemd, inotify-tools Filename: pool/main/r/rpi-swap/rpi-loop-utils_1.2.2_all.deb Size: 7780 MD5sum: 0e00154120efb9fafad59a934b521566 SHA1: a9494702af0a9434d20f75328003e1e98fd4a5cd SHA256: 74ce8eaca51c7d48135a211f02ecd3edf81d4e8e9fd8984d607f3cb578c9e666 SHA512: dc02085daca2ed246b84af207665ef710184e185dec661e5a81f80c2ed1647ba35ae0b1686d92f98be94305a9a88c15bed95dc546b63f189d27f50cfcde6523d Description: loop device utilities This package provides udev rules to automatically create/destroy /dev/disk/by-backingfile/ symlinks for loop devices. The templated systemd unit rpi-setup-loop@.service (for setting up/tearing down loop devices) is also provided. Homepage: https://www.raspberrypi.com/software Package: rpi-swap Priority: optional Section: embedded Installed-Size: 60 Maintainer: Richard Oliver Architecture: all Version: 1.2.2 Replaces: dphys-swapfile Provides: dphys-swapfile Depends: rpi-loop-utils, systemd-zram-generator, rpi-systemd-config Conflicts: dphys-swapfile Filename: pool/main/r/rpi-swap/rpi-swap_1.2.2_all.deb Size: 16252 MD5sum: c915f9f9d9d34be240d48323ef78538f SHA1: 91f599f52b3c58e1d5a943ea0582703ceb3cb5ed SHA256: d588cd552ce9036b5c72a0cc087769b304c1cee4bf8b29b4c086463fac672e95 SHA512: 7570eba7e564999e84c627f30a2549b333e9603c754d12dd07c00aa692a9408ebbbeb95b2efc3a1c433d745f3b313aabc4daca68744ab3c14a7c2c7ea1d33340 Description: early-boot swap configuration This packages provides early-boot generators/services to setup a variety of different swap configurations (such as file or zram+file). Dynamic resizing of swap files is also supported. Homepage: https://www.raspberrypi.com/software Package: rpi-systemd-config Priority: optional Section: admin Installed-Size: 27 Maintainer: Richard Oliver Architecture: all Version: 1.1.1 Depends: python3, libsystemd-shared (>= 252), libsystemd-shared (<< 258) | libsystemd0 (>= 252), libsystemd0 (<< 258) Filename: pool/main/r/rpi-systemd-config/rpi-systemd-config_1.1.1_all.deb Size: 7736 MD5sum: 73d6f2dc51ff48c11427d843591586a4 SHA1: dce118d818cb837f52a0b9abee10346b0a44da1c SHA256: 0ed2ebc92dff8d4c773b6065becbddfd11362771b200cbdc9cdf004de5a8d479 SHA512: 285ed0cc09028efe71ba967c86e54817df5af16a176fc2890e790145dce203b36b3c311d5ecfd2eab1310495fa4156e603bc294b85c39c4cf4b5c309f4d1fe20 Description: Query systemd configuration files A configuration query tool that extracts values from systemd configuration files and outputs shell variable assignments. Uses systemd's own configuration parsing logic to ensure compatibility and accuracy. Homepage: https://www.raspberrypi.com/software Package: rpi-update Priority: optional Section: admin Installed-Size: 31 Maintainer: Serge Schneider Architecture: all Version: 20230904 Depends: binutils, curl Filename: pool/main/r/rpi-update/rpi-update_20230904_all.deb Size: 7952 MD5sum: 77e1b9239cc8d60026856bbfbcaf3915 SHA1: f648c6f1daa77a43fbc2d5dec8f8cdb478b248db SHA256: d6e4e1d97c3dff32700b5ee36509db3411f21058b38ec985fd7d4a8d0d87e3cc SHA512: 6c8a3064a86eb4454a927d532977c999acd336346e7dc0423aaad0c7f9e0c030f3517c8335017ca416ff366021a3a168e180d6c5191808d5eb1ba6e87b86facf Description: Raspberry Pi firmware updating tool Tool to get the latest bleeding-edge firmware and kernel for your Raspberry Pi Homepage: https://github.com/Hexxeh/rpi-update Package: rpi-usb-gadget Priority: optional Section: admin Installed-Size: 107 Maintainer: Paul Oberosler Architecture: arm64 Version: 1.0.6 Depends: libc6 (>= 2.34), libglib2.0-0t64 (>= 2.70.0), libnm0 (>= 1.0.0), systemd, network-manager, iputils-arping Recommends: avahi-daemon, iputils-ping Filename: pool/main/r/rpi-usb-gadget/rpi-usb-gadget_1.0.6_arm64.deb Size: 14012 MD5sum: a827f980c38088395a25b8fea29e2ebd SHA1: c60f29be0f473af35a9127cb28f5b1676325c597 SHA256: 9080c652ea4e604ff66182f9cc50d1e85655873362eeb89fbd477925fc716e50 SHA512: 9a914098dfc5b54991d2894cf2cf8e71579afea8bff2a248dbc5a06db81e3cf099b548029cf88e670176c89c0d91592cb242df9db401ce60a97dfcf7ba998729 Description: USB gadget setup for Raspberry Pi OS Configures Raspberry Pi to present a USB Ethernet gadget. See project README for Windows host setup instructions. Homepage: https://github.com/raspberrypi/rpi-usb-gadget Package: rpicam-apps-core Priority: optional Section: video Installed-Size: 1016 Maintainer: Serge Schneider Architecture: arm64 Source: rpicam-apps Version: 1.12.0-1 Replaces: libcamera-apps (<< 1.4.1-1~), rpicam-apps (<< 1.8.1-1~bookworm), rpicam-apps-lite (<< 1.8.1-1~bookworm) Depends: libboost-program-options1.83.0 (>= 1.83.0), libc6 (>= 2.34), libcamera0.7 (>= 0.7.1+rpt20260429), libdrm2 (>= 2.4.99), libgcc-s1 (>= 3.0), librpicam-app1 (>= 1.12.0), libstdc++6 (>= 13.1), python3:any Conflicts: rpicam-apps (<< 1.8.1-1~bookworm), rpicam-apps-lite (<< 1.8.1-1~bookworm) Breaks: libcamera-apps (<< 1.4.1-1~), rpicam-apps (<< 1.8.1-1~bookworm), rpicam-apps-lite (<< 1.8.1-1~bookworm) Filename: pool/main/r/rpicam-apps/rpicam-apps-core_1.12.0-1_arm64.deb Size: 263832 MD5sum: 31f0060e2511f05e1c49fa4b472faec3 SHA1: f84732e0b7da861360919aee8dc6a9ecba84e82f SHA256: a2d23cbfb29d474662c402575fda7d4dec08e39e75f9943014f65bafeda422c7 SHA512: aae36e40ce256d53a36f7d33792787971cb0d13d7af65f8b3cb639ec102cd6331c0ccec14bb05fc0f08d4dc47a10e4377ba04da2d8faa53f2e0ed52798da6657 Description: Camera based applications for Raspberry Pi using the libcamera framework rpicam-apps is a suite of official command-line camera applications developed for Raspberry Pi, built on the libcamera framework. Tools like rpicam-still, rpicam-vid, and rpicam-preview enable high-quality image and video capture with official and 3rd party camera modules. The apps support a variety of controls and advanced features for flexible imaging use cases. . This is a metapackage that installs the core rpicam-apps applications. Homepage: https://github.com/raspberrypi/rpicam-apps/ Package: rpicam-apps-lite Priority: optional Section: oldlibs Installed-Size: 11 Maintainer: Serge Schneider Architecture: all Source: rpicam-apps Version: 1.12.0-1 Depends: rpicam-apps-core Filename: pool/main/r/rpicam-apps/rpicam-apps-lite_1.12.0-1_all.deb Size: 4694 MD5sum: 8324fd682a7604ebb76a5ca80bd8eda2 SHA1: 8c3f9a90ec878bb3ff5c5eb49b74b6555f6dccb5 SHA256: 4e1a271119ff83f638dc80ead1192f258d4feb20d791f2d1c66f3850d964a007 SHA512: 023b1eec5498f00ed9ad620043f807fdcfecc56e9d64b87f444c871abd598cd407bed2a9d79216a66bace96d1d4c160c2a52dd0d8e332757f65757a1bb02eac0 Description: transitional package This is a transitional package. It can safely be removed. Homepage: https://github.com/raspberrypi/rpicam-apps/ Package: rpifwcrypto Priority: optional Section: utils Installed-Size: 82 Maintainer: Serge Schneider Architecture: arm64 Source: raspi-utils Version: 20260601-1 Depends: libc6 (>= 2.34), libgnutls30t64 (>= 3.7.0), librpifwcrypto0 (>= 20260601) Filename: pool/main/r/raspi-utils/rpifwcrypto_20260601-1_arm64.deb Size: 15014 MD5sum: d132464848dc344750e46cf97cb04d3a SHA1: 204c6212c0c773b976d05fc426a49e3a3328d91a SHA256: fdec3b05b4226dd192195c3a7c210ec043a9020cfc7ac2299f3fb228660e3852 SHA512: 57f8ce8bb44ee0c9779b05422659bb6cdc7d8d39aa185797d754a91b22586751b1798271a7b19fecc475bb9adbfa73bff2fd6824a3eb66a4d88c4cc4dfddbf25 Description: Raspberry Pi Firmware Cryptography service command line tool A tool for secure cryptographic operations via firmware without exposing keys. Provides ECDSA P-256 signing and SHA256 HMAC functionality using device-unique OTP keys. Intended for use with Raspberry Pi Connect and secure-boot provisioner. Homepage: https://github.com/raspberrypi/utils Multi-Arch: foreign Package: userconf-pi Priority: optional Section: utils Installed-Size: 36 Maintainer: Serge Schneider Architecture: all Version: 0.18 Depends: raspi-config, dos2unix, raspberrypi-sys-mods Filename: pool/main/u/userconf-pi/userconf-pi_0.18_all.deb Size: 7822 MD5sum: 76aaf9f1a2cf12cc1d305cb566822a75 SHA1: 6077b2b13878012085ca98de45848ae5884faf6e SHA256: 623e885e930bac7fb69040190f02c7f0499a2162501c19f7236268e44041d3a9 SHA512: 5e2ece8b4f1ecdf551d56ed260a1f718e02ed840e186d3a309c4afc645beb531d58ba973079e7d61f61ba9195d6be77008ee94a8f8d5c620d42b4792ca4a319b Description: Raspberry Pi tool to rename a user A tool to rename a user account on Raspberry Pi